Unit of competency Outline

Information current as of
20/10/2026 10:01 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Test plant, tools, equipment, product and systems

Test plant, tools, equipment, product and systems

Unit of competency
National Code
AUMATK006
State Code
WH914
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
10/01/2014
View on TGA
State Implementation and Classification
Approved Date
11/03/2014
Original Release Date
10/01/2014
Nominal Hours
35
Field of Education
030717 - Plant And Machine Operations
Description
This unit describes the performance outcomes required to prepare, set up and test plant, tools, equipment, product and systems used to produce motor vehicles.It applies to those in an automotive manufacturing environment.No licensing, legislative or certification requirements apply to this unit at the time of publication.
General notes
N/A
Elements and Performance Criteria
1. Plan test
  • 1.1 Workplace procedures to test plant, tools, equipment, product or systems are identified and verified
  • 1.2 Test instructions and workplace checklists are interpreted to identify processes and materials
  • 1.3 Test equipment and plant tools are obtained according to work plans and workplace procedures
  • 1.4 Test equipment and tools are prepared and calibrated according to standards, operating instructions and workplace procedures
2. Conduct test
  • 2.1 Components to be tested are prepared and connected to test equipment
  • 2.2 Components are tested or cycled through test procedures according to test specifications
  • 2.3 Evidence of wear, malfunction or out-of-tolerance adjustment is reported and necessary action is taken
3. Interpret test results
  • 3.1 Test results are interpreted to identify possible causes of malfunction or unserviceability
  • 3.2 Further tests are conducted where required to determine causes of faults, malfunction or unserviceability
4. Initiate corrective action
  • 4.1 Corrective action is implemented according to workplace procedures
  • 4.2 Recommendations and corrective actions are documented according to procedures
5. Complete work processes
  • 5.1 Test results are reported to appropriate personnel and workplace documentation is completed and stored according to workplace procedures
  • 5.2 Work area and testing equipment are cleaned, inspected and stored according to workplace procedures
  • 5.3 Faulty test equipment is identified, tagged and reported
No information
No information
No information
State Code National Code Title Type
J831 AUM40113 Certificate IV in Automotive Manufacturing Qualification