Unit of competency Outline

Date retreived
22/07/2026 2:41 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Carry out heavy vehicle wheel alignment operations

Carry out heavy vehicle wheel alignment operations

Unit of competency
National Code
AURHTD004
State Code
AXD39
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
30
Description
This unit describes the performance outcomes required to carry out heavy vehicle wheel alignment operations. It involves identifying and confirming work requirements, preparing for the work, carrying out pre-alignment inspection and wheel alignment, and completing workplace processes and documentation.It applies to those working in the automotive service and repair industry. The wheel alignment operations include those of agricultural machinery, heavy commercial vehicles or mobile plant machinery. The unit does not apply to light vehicles, light commercial vehicles or motorcycles.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Carry out wheel alignment pre-checks
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Alignment pre-check information is sourced and interpreted
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Alignment pre-checks of vehicle wheels, steering and suspension condition are carried out according to manufacturer specifications, workplace procedures and safety requirements
  • 1.5 Faults are identified and reported according to workplace procedures as necessary
2. Carry out vehicle wheel alignment activities
  • 2.1 Vehicle wheel alignment specifications are sourced and interpreted
  • 2.2 Wheel alignment measuring equipment is connected to vehicle according to manufacturer specifications and workplace procedures
  • 2.3 Wheel alignment is carried out without causing damage to components or systems, and readings are recorded
  • 2.4 Corrective adjustments are carried out according to workplace procedures and safety requirements, and within manufacturer specifications
  • 2.5 Wheel alignment is re-checked to confirm accuracy of adjustments
  • 2.6 Post-adjustment wheel alignment readings are recorded and reported according to workplace procedures
3. Complete work process
  • 3.1 Final inspection is made to ensure work is to workplace expectations and vehicle is presented ready for use
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • 3.3 Tools and equipment are checked and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF146 AURHTD3004 Carry out wheel alignment operations (heavy vehicle) Unit of competency
Replaced By
State Code National Code Title Type
OCJ70 AURHTD104 Carry out heavy vehicle wheel alignment operations Unit of competency