Carry out cavity brick construction

Unit of competency Outline

Date retreived
22/07/2026 6:03 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Unit of competency

National Code
CPCCBL3003

State Code
OCQ06

TGA Status
Current

DTWD Status
Approved

Current Release Number
2.00

Current Release Date
24/12/2024

View on TGA

State Implementation and Classification

Approved Date

01/06/2021

Field of Education

040309 - Bricklaying And Stonemasonry

Original Release Date

01/06/2021

Nominal Hours

Description

This unit specifies the skills and knowledge required to construct cavity brick buildings and structures. It includes installing moisture barriers, ventilation and roof tie downs.This unit applies to bricklayers and blocklayers who work on new or existing structures. It is suitable for people operating with some autonomy. A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without needing close supervision.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001Prepare to work safely in the construction industrymeets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.

Notes

Elements and Performance Criteria

1 Prepare for work.

1.1 Select, fit correctly and use personal protective equipment (PPE) appropriate for job.
1.2 Read, interpret and apply cavity brick construction requirements from current plans, specifications, standards and codes.
1.3 Follow requirements in workplace safety and environmental documentation and workplace procedures.
1.4 Use measurements and apply formulas to calculate material quantities.
1.5 Determine job priorities and sequence job tasks in consultation with others on site.
1.6 Identify potential hazards and determine and implement control measures.
1.7 Select and check condition of plant, equipment and tools and report damage or faults to relevant person.
1.8 Check materials against the specifications and report non-conformities to relevant person.

2 Set out brickwork.

2.1 Set out and mark base brickwork.
2.2 Set out brickwork gauge and bond.
2.3 Set out load bearing brickwork.
2.4 Set out door and window positions.

3 Construct base brickwork.

3.1 Mix mortar to specified consistency.
3.2 Lay cavity brick base to set out marks.
3.3 Locate and install damp-proofing, weepholes and ventilation for suspended floor construction.

4 Construct brick walls.

4.1 Construct brick walls straight, plumb and level.
4.2 Fix wall ties to specified positions.
4.3 Locate and build in standard height door jambs and window frames into cavity walls.
4.4 Install lintels and head flashings to openings.
4.5 Construct gables and parapets maintaining line, level and plumb.
4.6 Install roof tie down and lateral support into walls.
4.7 Cut and lay sill bricks to a line as specified.

5 Rake or rule joints.

5.1 Rake or rule joints to specified profile and depth.
5.2 Brush down face of brickwork to remove unwanted mortar prior to drying.

6 Clean up.

6.1 Clear the work area, and dispose of, reuse or recycle materials following workplace and environmental requirements.
6.2 Clean tools and equipment, check for serviceability and report damage or faults.
6.3 Store and secure tools and equipment following workplace procedures.

No information

Replaces

State Code	National Code	Title	Type
W9322	CPCCBL3003A	Carry out cavity brick construction	Unit of competency

State Code	National Code	Title	Type
BGD8	CPC33020	Certificate III in Bricklaying and Blocklaying	Qualification