Unit of competency Outline

Date retreived
22/07/2026 6:46 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate and monitor fuel firing plant (gas or oil)

Operate and monitor fuel firing plant (gas or oil)

Unit of competency
National Code
UEPOPS314
State Code
OAH14
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
31/10/2018
View on TGA
State Implementation and Classification
Approved Date
15/05/2019
Field of Education
030717 - Plant And Machine Operations
Original Release Date
15/05/2019
Nominal Hours
36
Description
This unit involves the skills and knowledge required to operate, inspect and monitor fuel firing plant (gas or oil).Regular inspections and monitoring of fuel firing plant is required to ensure the safe operation of gas and/or oil firing systems.Competency in this unit requires the ability to plan work, operate fuel firing (gas or oil) plant, test fuel firing plant, analyse fuel firing plant faults, monitor and inspect fuel firing plant and the completion of all documentation. Individuals will, in general, work under supervision, in a power generation facility as an operator. Power generation plant operators are typically trained and authorised to isolate, prepare plant and issue permits to work.No licensing, legislative or certification requirements apply to this unit at the time of publication.Note: Workplace practiceThe application of the skills and knowledge described in this unit may require a licence or training permit to practice in the workplace where work is carried out on gas and electrical installations. Additional conditions may apply under state and territory legislative and regulatory licensing requirements.
Notes
Elements and Performance Criteria
1 Plan and prepare work
  • 1.1 Safety issues related to operating and monitoring fuel firing plant are identified, in accordance with workplace procedures and Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations and legislative requirements
  • 1.2 Work requirements are identified, in accordance with workplace procedures, from relevant personnel and documentation
  • 1.3 Documentation to determine fuel firing plant status is assessed and evaluated, in accordance with workplace procedures
  • 1.4 Inspection, preoperational tests and field preparations for fuel firing plant service are carried out, in accordance with workplace procedures and manufacturers' recommendations
  • 1.5 Fuel firing plant operational prerequisites are established, in accordance with workplace procedures and manufacturers' recommendations
  • 1.6 Sequence for recommissioning of fuel firing plant is determined, in accordance with workplace procedures and site requirements
2 Operate fuel firingplant
  • 2.1 Fuel firing plant is operated, in accordance with workplace procedures and manufacturers' operating recommendations
  • 2.2 Fuel firing plant is monitored and observed, in accordance with workplace procedures, to detect deviations from normal operating conditions
  • 2.3 Corrective actions are taken to rectify fuel firing plant abnormalities, in accordance with workplace procedures and manufacturers' recommendations
3 Test fuel firingplant operation
  • 3.1 Operational tests are performed, in accordance with workplace procedures
  • 3.2 Fuel firing plant is observed, in accordance with workplace procedures, for correct operational response
  • 3.3 Corrective action is taken, in accordance with workplace procedures, when response does not meet with documentation, fuel firing plant integrity or personnel safety requirements
  • 3.4 Fuel firing plant is returned to required operational status upon completion of test, in accordance with workplace procedures
4 Analyse fuel firingplant faults
  • 4.1 Causes of abnormal fuel firing plant operating conditions are identified, in accordance with workplace procedures, and by analysing technical and operational information
  • 4.2 Corrective action is taken, in accordance with workplace procedures
  • 4.3 Fuel firing plant integrity and personnel safety is maintained, in accordance with workplace procedures, and in consultation with appropriate personnel and technical and operational documentation
5 Monitor and inspect fuel firingplant
  • 5.1 Fuel firing plant to be monitored and inspected is physically identified, in accordance with workplace procedures
  • 5.2 Fuel firing plant is monitored and inspected for normal operation or to detect deviations, in accordance with workplace procedures
  • 5.3 Corrective action is taken, in accordance with workplace procedures
  • 5.4 Appropriate personnel are notified when defects are detected, in accordance with workplace procedures
6 Complete documentation
  • 6.1 Fuel firing plant problems, movements, and status are reported, in accordance with workplace procedures
  • 6.2 Documentation is updated, in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WE337 UEPOPS314B Operate and monitor fuel firing plant (gas or oil) Unit of competency
Replaced By
State Code National Code Title Type
ODY13 UEPOPS095 Operate and monitor fuel firing plant - gas/oil Unit of competency