Unit of competency Outline

Date retreived
23/07/2026 12:48 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Transport horses by road

Transport horses by road

Unit of competency
National Code
RGRPSH312
State Code
OAB40
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
05/07/2018
View on TGA
State Implementation and Classification
Approved Date
08/02/2019
Field of Education
050105 - Animal Husbandry
Original Release Date
08/02/2019
Nominal Hours
45
Description
This unit of competency describes the skills and knowledge required to safely transport horses to destinations by road. It covers regulatory requirements, conducting vehicle safety checks, loading and unloading horses, and monitoring the care of horses during transit.The unit applies to individuals who work under broad direction using practical skills and specialised knowledge of safe horse handling and transportation, within the racing industry.All work must be carried out to comply with workplace procedures, in accordance with applicable state/territory animal welfare and workplace health and safety legislative requirements.Licensing, legislative, regulatory or certification requirements may apply to this unit. Users are advised to check with the relevant Principal Racing Authority (PRA) for current requirements.
Notes
Elements and Performance Criteria
1. Follow regulations and requirements for horse transportation
  • 1.1 Confirm transport requirements, schedule, destination and route
  • 1.2 Identify the load capacity of vehicle or tow vehicle and float, and appropriateness for load and road condition
  • 1.3 Confirm driver's licence is correct for type of transport required
  • 1.4 Ensure vehicle logbooks, permits or transport documentation are maintained according to workplace procedures and regulatory requirements
2. Carry out vehicle and safety checks
  • 2.1 Inspect vehicle lights and brakes to confirm good working order
  • 2.2 Inspect exterior of vehicle or tow vehicle and float for safety
  • 2.3 Inspect interior of vehicle and float for safety
3. Load horses
  • 3.1 Set up vehicle and equipment safely in designated loading area
  • 3.2 Identify potential loading hazards and problems, and control risks
  • 3.3 Check and complete transport documentation, including horse identification details
  • 3.4 Work collaboratively with others to ensure safe and timely loading of horses
  • 3.5 Select and use safe handling strategies for loading difficult horses
  • 3.6 Position and restrain horses according to workplace procedures, float design and animal welfare guidelines
4. Supervise care of horses in transit
  • 4.1 Record horse health and condition status prior to and after journey
  • 4.2 Identify poor travellers and make adjustments to protect from injury and reduce stress
  • 4.3 Use driving techniques that are safe and adjusted for road condition and load
  • 4.4 Identify and manage signs of stress and other illness indicators in horses being transported
  • 4.5 Follow documented requirements for travel, including for long haul trips
5. Unload horses and complete post-transport arrangements
  • 5.1 Unload horses in designated area at destination in collaboration with other personnel
  • 5.2 Check and record horse health and condition status after journey
  • 5.3 Complete required documentation according to workplace and regulatory requirements
  • 5.4 Clean, maintain and secure vehicle, equipment and facilities according to workplace procedures
No information
No information
No information