Unit of competency Outline

Date retreived
22/07/2026 7:10 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate and Monitor Dual Fuel Firing Plant

Operate and Monitor Dual Fuel Firing Plant

Unit of competency
National Code
UEPOPS354A
State Code
S5240
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
07/11/2006
View on TGA
State Implementation and Classification
Approved Date
31/05/2011
Field of Education
030717 - Plant And Machine Operations
Original Release Date
31/05/2011
Nominal Hours
40
Description
1)
This unit deals with the skills and knowledge required for the operation, inspection and monitoring of dual fuel firing plant in which each fuel source is capable of providing 100% Maximum Continuous Rating.
Notes
Elements and Performance Criteria
1 Plan and prepare work
  • 1.1 Safety issues are identified to comply with enterprise/site requirements
  • 1.2 Work requirements are identified from relevant personnel and documentation
  • 1.3 Documentation to determine plant status is assessed and evaluated
  • 1.4 Localised plant inspection, pre-operational tests and field preparations for service are carried out in accordance with manufacturer and enterprise/site procedures
  • 1.5 Plant operational prerequisites are established in accordance with manufacturer and enterprise/site procedures
  • 1.6 Sequence for recommissioning of plant is determined to suit existing circumstances in accordance with enterprise/site requirements
  • 1.7 Where appropriate, the teams and individuals roles and responsibilities within the team are identified and, where required, assist in the provision of the on-the-job training
2 Operate plant
  • 2.1 Plant is operated in accordance with enterprise and manufacturer operating procedures
  • 2.2 Changeover from one fuel source to the other is conducted with minimal effect on load and steam conditions
  • 2.3 Plant is monitored and observed to detect deviations from normal operating conditions
  • 2.4 Corrective actions are taken to rectify abnormalities in accordance with manufacturer and enterprise/site procedures
3 Test plant operation
  • 3.1 Tests are performed in accordance with defined procedures applicable to the operational test
  • 3.2 Plant is observed for correct operational response
  • 3.3 Corrective action is taken when response is not in accordance with documentation, plant integrity or personnel safety requirements
  • 3.4 Plant is returned to required operational status upon completion of test
4 Analyse plant faults
  • 4.1 Causes of abnormal plant operating conditions are identified by analysing the technical and operational information in a logical and sequential manner
  • 4.2 Corrective action taken is in accordance with enterprise procedures
  • 4.3 Plant integrity and personnel safety is maintained through consultation with appropriate personnel, and with reference to plant, technical and operational documentation
5 Monitor and inspect plant
  • 5.1 Plant to be monitored/inspected is physically identified
  • 5.2 Plant is monitored/inspected for normal operation or to detect deviations
  • 5.3 Corrective action taken is in accordance with enterprise procedures
  • 5.4 Appropriate personnel are notified when defects are detected
6 Complete documentation
  • 6.1 Documentation is updated and plant problems, movements, abnormalities and status are reported and logged in accordance with enterprise/site procedures
No information
No information
Replaced By
State Code National Code Title Type
WE373 UEPOPS354B Operate and monitor dual fuel firing plant Unit of competency