Unit of competency Outline

Date retreived
22/07/2026 10:34 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Test laminated wood product

Test laminated wood product

Unit of competency
National Code
FWPTMM4214
State Code
OFC77
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
25/01/2023
View on TGA
State Implementation and Classification
Approved Date
19/05/2023
Field of Education
030305 - Materials Engineering
Original Release Date
19/05/2023
Nominal Hours
35
Description
This unit of competency describes the skills and knowledge required to collect, prepare and test samples of laminated wood products. The unit includes interpreting test results for the identification of problems in production, and making necessary changes to processes.The unit applies to individuals who are engaged in the production of laminated wood products.All work must be carried out to comply with workplace procedures, according to state/territory health and safety regulations, legislation and standards that apply to the workplace.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for testing laminated wood product
  • 1.1 Determine job requirements from work order or instruction and, where required, seek clarification from appropriate personnel
  • 1.2 Confirm workplace health and safety and environmental protection practices and/or procedures for the task, including use of personal protective equipment
  • 1.3 Confirm legislation, standards and codes of practice relevant to testing laminated wood product
  • 1.4 Identify and assess hazards and take actions to mitigate risks related to testing operations
  • 1.5 Consult appropriate personnel to ensure that work is coordinated effectively with others in the workplace
  • 1.6 Select tools and equipment for testing operations, and check for serviceability according to workplace procedures
  • 1.7 Collect, label and prepare test samples according to workplace procedures
2. Calibrate equipment for testing laminated wood product
  • 2.1 Set up equipment for testing laminated wood product according to workplace procedures and/or relevant Australian Standards
  • 2.2 Calibrate test equipment according to manufacturer instructions, workplace procedures and/or relevant Australian Standards
  • 2.3 Record calibration results according to workplace procedures
3. Conduct test on laminated wood product and analyse test results
  • 3.1 Test sample according to workplace procedures and/or relevant Australian Standards
  • 3.2 Collate information on test results
  • 3.3 Analyse and record test results
  • 3.4 Store samples according to workplace procedures
4. Finalise test
  • 4.1 Communicate test results according to workplace procedures
  • 4.2 Report sub-standard test results, assist with the identification of production problems and recommend corrective actions
  • 4.3 Modify test sampling process in response to identified problems and production changes
  • 4.4 Record and report testing outcomes
No information
No information
Replaces
State Code National Code Title Type
AXJ61 FWPTMM4204 Sample and test products to specifications Unit of competency