Unit of competency Outline

Date retreived
22/07/2026 6:33 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Test and measure cellular phone and network equipment performance

Test and measure cellular phone and network equipment performance

Unit of competency
National Code
ICTRFN502
State Code
AWD87
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
14/01/2016
View on TGA
State Implementation and Classification
Approved Date
05/07/2016
Field of Education
031309 - Communications Equipment Installation And Maintenance
Original Release Date
05/07/2016
Nominal Hours
50
Description
This unit describes the skills and knowledge required to analyse test results and recommend modifications to the network. It applies to individuals working as field officers and supervisors from telecommunications carriers, service providers, contractors and other public or private organisations who perform measurements during equipment upgrades or during commissioning, acceptance testing and routine maintenance on cellular network equipment.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to test cellular phone and network equipment
  • 1.1 Obtain and follow relevant legislation, codes, regulations and standards
  • 1.2 Scope work by obtaining work details from appropriate personnel and arrange for site access to comply with security arrangements
  • 1.3 Evaluate manufacturer’s technical documentation and network procedures to plan test schedule for cellular network
  • 1.4 Verify calibration of test equipment to ensure that tested cellular equipment is compliant
  • 1.5 Prepare cellular equipment for testing according to manufacturer’s test procedure
  • 1.6 Notify operational staff of test and measurement schedule to ensure minimal impact on cellular network
2. Test and measure cellular phone and network equipment
  • 2.1 Work safely following work health and safety (WHS) and environmental requirements for given work, identifying hazards and using personal protective equipment
  • 2.2 Configure network equipment for testing and set options to record test results
  • 2.3 Block or mask alarms that may be triggered and interfere with test program
  • 2.4 Run performance measurement software with options set and record test results
  • 2.5 Re-establish alarms and normal operational status at conclusion of tests, and notify appropriate personnel of completion of test schedule
3. Analyse measurement and prepare evaluation report
  • 3.1 Analyse results of performance tests and measurements and determine performance level of cellular equipment and compatibility with network
  • 3.2 Prepare evaluation report, making recommendations on network modifications or changes to configurations settings for improved quality of service
  • 3.3 Present test results and evaluation report to appropriate personnel according to enterprise policy
No information
No information
Replaces
State Code National Code Title Type
D3410 ICTRFN5148A Test and measure cellular phone and network equipment performance Unit of competency
Replaced By
State Code National Code Title Type
OCV52 ICTRFN505 Test and measure cellular phone and network equipment performance Unit of competency