Unit of competency Outline

Date retreived
23/07/2026 5:01 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct training area inspections

Conduct training area inspections

Unit of competency
National Code
DEFRNG007
State Code
AVP59
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
22/10/2015
View on TGA
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
080317 - Quality Management
Original Release Date
05/08/2016
Nominal Hours
0
Description
This unit describes the skills required to conduct a formal inspection of a training area. It includes the planning, preparation, conduct and follow up action.This unit was developed for Defence personnel who work in range management and range control but may be relevant to others who work in this field. The skills and knowledge described in this unit must be applied within the legislative, regulatory and policy environment in which they are carried out. Organisational policies and procedures must be consulted and adhered to.Those undertaking this unit would work independently or as part of a team, under direct and indirect supervision, while performing complex tasks, in a small range of familiar contexts. They would use discretion and judgement and take responsibility for the quality of their outputs. No licensing, legislative or certification requirements apply to unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to conduct training area/range inspection
  • 1.1 Establish and confirm statutory requirements relevant to the range, training area and purpose of the inspection with relevant personnel.
  • 1.2 Conduct briefings for users, staff and contractors.
  • 1.3 Obtain clearances for training area access.
  • 1.4 Identify and acquire resources required for inspection.
2. Conduct training area/range inspection
  • 2.1 Undertake inspections in accordance with Range Standing Orders and instructions.
  • 2.2 Apply safety precautions in accordance with Range Standing Orders, instructions and legislation/regulation.
  • 2.3 Apply immediate appropriate action where conditions warranting such action are observed or encountered.
  • 2.4 Check, record and report equipment and infrastructure serviceability according to Range Standing Orders, instructions, manuals and standards.
3. Report on training area/range inspection
  • 3.1 Complete post inspection reports and briefs according to relevant standing orders, instructions and regulation.
  • 3.2 Complete training area contamination records, reports and briefs.
  • 3.3 Initiate equipment and infrastructure maintenance and/or refurbishment.
  • 3.4 Provide briefs to users and other agencies and contractors on serviceability of equipment and infrastructure.
4. Maintain training records
  • 4.1 Complete inspection records.
  • 4.2 Complete contamination plots, charts and records according to relevant standing orders, instructions, policy and procedures.
No information
No information
No information
State Code National Code Title Type
AWX8 DEF45115 Certificate IV in Range Control Qualification
AWW6 DEF55115 Diploma of Range Management Qualification