Unit of competency Outline
Date retreived
22/07/2026 11:30 AM AWST
22/07/2026 11:30 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Collect routine site samples
Collect routine site samples
Unit of competency
National Code
RIISTD202E
RIISTD202E
State Code
OCX44
OCX44
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
18/06/2021
Field of Education
019909 - Laboratory Technology
Original Release Date
18/06/2021
Nominal Hours
80
Description
This unit describes the skills and knowledge required to collect routine site samples in the resources and infrastructure industries, including determining sample quantity, frequency and type, and collecting, storing and transporting samples.It applies to those working in production operator, field assistant and laboratory assistant roles. They generally work under supervision to undertake a prescribed range of functions involving known routines and procedures and take some responsibility for the quality of work outcomes.Licensing, legislative and certification requirements that apply to this unit can vary between states, territories and industry sectors. Users must check requirements with relevant body before applying the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare for sampling
- 1.1 Obtain, interpret, clarify and confirm work instructions
- 1.2 Access, interpret and apply documentation required to collect routine site samples
- 1.3 Select and wear personal protective equipment according to site requirements
- 1.4 Confirm and coordinate site access, clearances and permits
- 1.5 Identify, address and report environmental issues, potential hazards and risks
- 1.6 Confirm sampling method according to sample plan and job requirements
- 1.7 Select plant, tools and equipment required to carry out tasks and check for faults
- 1.8 Identify, confirm, and locate materials required for work application
2. Collect and store samples
- 2.1 Collect samples according to job requirements
- 2.2 Preserve sample integrity
- 2.3 Place samples in containers and label according to job requirements
- 2.4 Document representative sampling, sampling environment, and non-standard aspects according to job requirements
- 2.5 Store and transport samples according to job requirements
- 2.6 Maintain sampling equipment
3. Prepare and recover samples
- 3.1 Verify sample, confirm documentation and equipment for preparation according to job requirements
- 3.2 Prepare samples according to job requirements
- 3.3 Contain loss of material and protect sample against contamination
- 3.4 Recover and clean samples according to sample type and job requirements
- 3.5 Store or dispose of residues and samples according to site requirements
4. Prepare samples for dispatch
- 4.1 Label, store and transport samples according to job requirements
- 4.2 Use reference materials, standards and controls according to job requirements
- 4.3 Document change to preparation methods according to job requirements
- 4.4 Forward samples to external laboratories for analysis
- 4.5 Store, test and dispose of samples according to site requirements
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WH697 | RIISTD202D | Collect routine site samples | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BGL3 | RII40820 | Certificate IV in Civil Construction Design | Qualification |