Unit of competency Outline
Date retreived
22/07/2026 1:07 PM AWST
22/07/2026 1:07 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Repair deck, hull and cabin equipment
Repair deck, hull and cabin equipment
Unit of competency
National Code
AURR346866B
AURR346866B
State Code
D7669
D7669
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
27/09/2011
Field of Education
031703 - Marine Construction
Original Release Date
27/09/2011
Nominal Hours
30
Description
This unit of competency describes the skills and knowledge required to repair vessel deck, hull and cabin equipment and fittings using approved methods, materials and equipment. It requires the ability to identify and confirm work requirements, repair deck, hull and cabin equipment and fittings, test and recommission vessel and complete work finalisation processes.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for work
- 1.1. Confirm nature and scope of work to be carried out
- 1.2. Locate occupational health and safety (OHS) and workplace environmental and sustainable procedures and practices, applicable to the work
- 1.3. Access and interpret repair method, workshop manuals and manufacturer information
- 1.4. Check and prepare tools, equipment and materials
- 1.5. Set up work area
2. Repair deck and hull
- 2.1. Inspect deck and hull and identify deterioration and damage
- 2.2. Perform repairs and adjustment operations in accordance with manufacturer and component supplier specifications, and OHS and workplace environmental and sustainable procedures and practices
- 2.3. Test repairs, make required adjustments and re-test
- 2.4. Determine the need for water testing
3. Repair cabin equipment and fittings
- 3.1. Inspect cabin equipment and fittings and identify deterioration and damage
- 3.2. Perform repairs and adjustment operations in accordance with manufacturer and component supplier specifications, and OHS and workplace environmental and sustainable procedures and practices
4. Test and recommission vessel
- 4.1. Test deck, hull and cabin equipment and fittings for correct operation in accordance with manufacturer and component supplier specifications
- 4.2. Repair and test failed systems
- 4.3. Determine and report vessel deck, hull and cabin equipment and fittings which fail testing and gain rectification approval from customer
- 4.4. Determine the need for water testing
- 4.5. Carry out recommissioning procedures in accordance with manufacturer and component supplier specifications, and OHS and workplace environmental and sustainable procedures and practices
5. Clean up work area and finalise work
- 5.1. Clean and inspect equipment and tooling according to workplace requirements
- 5.2. Tag unserviceable equipment and faults identified in accordance with workplace requirements
- 5.3. Clean work area, dispose of waste and scrap, and store tools and equipment in accordance with workplace procedures
- 5.4. Finalise and process work completion documentation and give to appropriate persons, as required
- 5.5. Prepare report for the customer detailing work undertaken and technical or regulatory requirements
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W5257 | AURR346866A | Repair deck, hull, and deck and cabin equipment and fittings | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WF319 | AURRTA3005 | Repair deck, hull and cabin equipment | Unit of competency |