Unit of competency Outline

Date retreived
22/07/2026 9:56 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Carry out basic stonemasonry demolition

Carry out basic stonemasonry demolition

Unit of competency
National Code
CPCCST3025
State Code
OCO26
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
040309 - Bricklaying And Stonemasonry
Original Release Date
01/06/2021
Nominal Hours
30
Description
This unit specifies the skills and knowledge required to demolish or dismantle sections of existing stonework in structures for renovations, additions or extensions. It includes removal of stone and components in the monumental and heritage sectors of stonemasonry. This unit applies to stonemasons who work independently or in a team to carry out basic demolition relating to stonemasonry work.A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without needing close supervision.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001Prepare to work safely in the construction industrymeets this requirement. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan the work.
  • 1.1 Read, interpret and apply basic stonemasonry demolition requirements from demolition plans, work instructions, standards and codes.
  • 1.2 Follow relevant information from workplace procedures and workplace safety and environmental documentation.
  • 1.3 Identify construction type and internal and external load bearing structures.
  • 1.4 Identify connected and disconnected services and confirm with appropriate person.
  • 1.5 Identify potential hazards, including hazardous materials, and determine and implement control measures.
  • 1.6 Determine job priorities and sequence job tasks in consultation with others on site.
2 Prepare for work.
  • 2.1 Select, fit correctly and use personal protective equipment (PPE) appropriate for job.
  • 2.2 Determine method of demolition or dismantling.
  • 2.3 Select and check condition of plant, equipment and tools and report damage or faults to relevant person.
  • 2.4 Erect exclusion zones and signage.
  • 2.5 Erect and stabilise work platform following workplace procedures and workplace safety.
3 Remove components.
  • 3.1 Set out section for demolition or mark components for individual removal following work instructions.
  • 3.2 Remove components sequentially and maintain structural stability.
  • 3.3 Demolish set out section without damage to surrounding components.
4 Clean up.
  • 4.1 Clear the work area, and dispose of, reuse or recycle materials following workplace and environmental requirements.
  • 4.2 Clean tools and equipment, check for serviceability and report damage or faults.
  • 4.3 Store and secure tools and equipment following workplace procedures.
No information
No information
No information
State Code National Code Title Type
BGE7 CPC32320 Certificate III in Stonemasonry Qualification