Unit of competency Outline
Information current as of
19/10/2026 9:48 PM AWST
19/10/2026 9:48 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Repair plant, tooling, equipment or systems - Complex
Repair plant, tooling, equipment or systems - Complex
Unit of competency
National Code
AUM2203A
AUM2203A
State Code
AXY50
AXY50
TGA Status
Replaced
Replaced
DTWD Status
Archived
Archived
State Implementation and Classification
Approved Date
Original Release Date
06/08/2000
Nominal Hours
0
Field of Education
030701 - Mechanical Engineering
Description
N/A
General notes
N/A
Elements and Performance Criteria
No information
Carry out repair or modifying of plant, tooling and equipment incorporating complex control systems which utilise combination of electrical, electronic, hydraulic, pneumatic and mechanical principles.
Note: The application of this competency standard must comply with the appropriate AQF level descriptor criteria.
Sources of information/documents may include:
Manufacturer specifications
Enterprise operating procedures
Product manufacturer specifications
Customer requirements
Industry/Workplace Codes of Practice
OH&S practices must abide by:
State/industry OH&S legislation
Award provisions
Resources may include:
Type of plant, tooling and equipment (as per company installation)
Documentation and reporting systems (as per company requirements)
Methods include:
Identifying, removing, diagnosing, repairing, re-installing, calibrating, adjusting and/or testing, plant, tooling, equipment or systems.
Methods should be applied under normal operating conditions.
Note: The application of this competency standard must comply with the appropriate AQF level descriptor criteria.
Sources of information/documents may include:
Manufacturer specifications
Enterprise operating procedures
Product manufacturer specifications
Customer requirements
Industry/Workplace Codes of Practice
OH&S practices must abide by:
State/industry OH&S legislation
Award provisions
Resources may include:
Type of plant, tooling and equipment (as per company installation)
Documentation and reporting systems (as per company requirements)
Methods include:
Identifying, removing, diagnosing, repairing, re-installing, calibrating, adjusting and/or testing, plant, tooling, equipment or systems.
Methods should be applied under normal operating conditions.
Context:
Competency must be assessed in a safe working environment.
Assessment must be undertaken in accordance with endorsed industry assessment guidelines.
The knowledge and practical component may be assessed in an on- or off-the-job environment.
Assessment may take place within the work place or appropriate simulated environment.
The trainee should be able to carry out the task to be assessed in a safe and correct manner without supervision on more than one occasion prior to assessment.
Critical aspects:
It is essential that competence is fully observed and there is the ability to transfer the competency to changing circumstances and to respond to unusual situations in the critical aspects of:
Degree of complexity
Safe working practices
Documentation
Technical specifications
Planning
Underpinning knowledge:
Identifying faulty plant, tooling, equipment or systems
Removing faulty plant, tooling, equipment or systems
Diagnosing faults in plant, tooling, equipment or systems
Repairing faults in plant, tooling, equipment or systems
Re-installing plant, tooling, equipment or systems
Calibrating, adjusting and/or testing plant, tooling, equipment or systems
Practical assessments:
Perform work under the required level of supervision
Use and maintain all required materials, tools and parts
Diagnose and solve problems involved in the work
Achieve specified quality standards
Apply housekeeping standards
Apply knowledge of OH&S requirements
Apply knowledge of required quality improvement techniques
Demonstrate ability to minimise waste
Apply knowledge of relevant company procedures
Apply knowledge of emergency procedures
Apply knowledge of reporting and documentation requirements
Communicate effectively with team members, management and user departments
Competency must be assessed in a safe working environment.
Assessment must be undertaken in accordance with endorsed industry assessment guidelines.
The knowledge and practical component may be assessed in an on- or off-the-job environment.
Assessment may take place within the work place or appropriate simulated environment.
The trainee should be able to carry out the task to be assessed in a safe and correct manner without supervision on more than one occasion prior to assessment.
Critical aspects:
It is essential that competence is fully observed and there is the ability to transfer the competency to changing circumstances and to respond to unusual situations in the critical aspects of:
Degree of complexity
Safe working practices
Documentation
Technical specifications
Planning
Underpinning knowledge:
Identifying faulty plant, tooling, equipment or systems
Removing faulty plant, tooling, equipment or systems
Diagnosing faults in plant, tooling, equipment or systems
Repairing faults in plant, tooling, equipment or systems
Re-installing plant, tooling, equipment or systems
Calibrating, adjusting and/or testing plant, tooling, equipment or systems
Practical assessments:
Perform work under the required level of supervision
Use and maintain all required materials, tools and parts
Diagnose and solve problems involved in the work
Achieve specified quality standards
Apply housekeeping standards
Apply knowledge of OH&S requirements
Apply knowledge of required quality improvement techniques
Demonstrate ability to minimise waste
Apply knowledge of relevant company procedures
Apply knowledge of emergency procedures
Apply knowledge of reporting and documentation requirements
Communicate effectively with team members, management and user departments
No information