Unit of competency Outline

Date retreived
22/07/2026 11:57 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

MANOEUVRE AND HANDLE A VESSEL OF 500 GROSS TONNAGE OR MORE UNDER ALL CONDITIONS

MANOEUVRE AND HANDLE A VESSEL OF 500 GROSS TONNAGE OR MORE UNDER ALL CONDITIONS

Unit of competency
National Code
TDMMC107B
State Code
S5379
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
19/06/2007
State Implementation and Classification
Approved Date
21/12/2007
Field of Education
031705 - Marine Craft Operation
Original Release Date
21/12/2007
Nominal Hours
40
Description
UNIT DESCRIPTOR:This unit involves the skills and knowledge required to manoeuvre a commercial vessel of 500 gross tonnage or more under all possible weather and operational conditions, including berthing, mooring and anchoring operations and manoeuvring during an emergency.
Notes
Elements and Performance Criteria
No information
Range Statement
TDMMC107B MANOEUVRE AND HANDLE A VESSEL OF 500 GROSS TONNAGE OR MORE UNDER ALL CONDITIONS

The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.
VARIABLE
SCOPE
1. GENERAL CONTEXT


a.
Work must be carried out:
1
in compliance with relevant sections of applicable maritime regulations


b.
Work is performed:
1
relatively independently under broad operational requirements, with accountability and responsibility for self and others in achieving the prescribed outcomes


c.
Work involves:
1
the application of a significant range of fundamental nautical principles and complex manoeuvring techniques across a wide and often unpredictable variety of operational contexts. Contribution to the development of a broad plan, budget or strategy for vessel operations is required and accountability and responsibility for self and others in achieving the outcomes is involved


d.
Work requires:
1
significant judgement in planning, technical and leadership functions related to manoeuvring operations and procedures for vessels of 500 gross tonnage or more
2. WORKSITE ENVIRONMENT


a
Vessel may include:
1
any Australian or international commercial vessel of 500 gross tonnage or more


b
Manoeuvres may be carried out:
1
by day or night in both normal and emergency situations
2
under normal and adverse conditions of weather and loading
3
during berthing and unberthing operations
4
while anchoring or mooring


c
Manoeuvres may include:
1
berthing and unberthing
2
mooring or anchoring
3
approaching pilot stations and embarking and disembarking pilots

Range Statement (continued)
TDMMC107B MANOEUVRE AND HANDLE A VESSEL OF 500 GROSS TONNAGE OR MORE UNDER ALL CONDITIONS

VARIABLE
SCOPE

c

Manoeuvres may include:
(continued)

4

handling vessel in shallow water, rivers, estuaries and restricted waters
5
navigating in or near ice or in conditions of ice accumulation on board
6
navigating in and near traffic separation schemes and vessel traffic service areas
7
interactions with tugs
8
use of propulsion and manoeuvring systems
9
dragging an anchor and clearing a foul anchor
10
dry docking both with and without damage


d
Emergencies may include:
1
loss of rudder
2
loss of propeller
3
when hove to
4
fire or flooding on board a vessel.


e
Special handling techniques required in heavy weather may include:
1
assisting a vessel or aircraft in distress
2
towing operations
3
launching rescue boats and survival craft
4
taking on board survivors from rescue boats and survival craft
5
keeping an unmanageable vessel out of the trough of the sea
6
lessening drift


f
Documentation and recordsmay include:
1
ISM Code safety management system plans, procedures, checklists and instructions
2
operational orders and company procedures
3
navigational charts
4
IMO STCW Convention and Code
5
AMSA Marine Orders
6
IMO SOLAS Convention
7
vessel's log
8
vessel manufacturer's instructions and recommended procedures
9
notices and instructions of relevant maritime authorities

Range Statement (continued)
TDMMC107B MANOEUVRE AND HANDLE A VESSEL OF 500 GROSS TONNAGE OR MORE UNDER ALL CONDITIONS

VARIABLE
SCOPE

f

Documentation and recordsmay include:
(continued)

10

pilot instructions where relevant
11
relevant Australian and international standards


g
Applicable legislation, regulations and codes may include:
1
relevant sections of IMO STCW Convention and Code
2
relevant sections of AMSA Marine Orders
3
IMO SOLAS Convention
4
International Regulations for Preventing Collisions at Sea
5
relevant international, Commonwealth, State and Territory OH&S legislation
Evidence Guide
TDMMC107B MANOEUVRE AND HANDLE A VESSEL OF 500 GROSS TONNAGE OR MORE UNDER ALL CONDITIONS

The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for this Training Package.
1
Critical aspects of evidence required to demonstrate competency in this unit
Assessment must confirm appropriate knowledge and skills to:
a
Manoeuvre the vessel:

1
safely in both normal and emergency situations

2
in normal and adverse weather conditions

3
with the assistance of tugs

4
in berthing and unberthing operations

5
when anchoring or mooring
b
Exercise required safety and hazard control procedures when manoeuvring the vessel
c
Identify typical manoeuvring problems and take appropriate action
d
Communicate effectively with others during manoeuvring operations


2
Evidence required for demonstration of consistent performance
a
Performance is demonstrated consistently over a period of time and in a suitable range of contexts
b
Consistently applies underpinning knowledge and skills when:

1
completing manoeuvring operations

2
identifying and evaluating manoeuvring problems and determining appropriate courses of action

3
identifying and implementing improvements to manoeuvring procedures

4
applying safety precautions relevant to manoeuvring operations

5
assessing operational capability of vessel and manoeuvring plant and equipment
c
Shows evidence of application of relevant workplace procedures, including:

1
relevant sections applicable maritime regulations

2
ISM Code and associated vessel's safety management system and procedures

3
OH&S regulations and hazard prevention policies and procedures

4
job procedures and work instructions

Evidence Guide (continued)
TDMMC107B MANOEUVRE AND HANDLE A VESSEL OF 500 GROSS TONNAGE OR MORE UNDER ALL CONDITIONS

2
Evidence required for demonstration of consistent performance
(continued

5
relevant manufacturer's guidelines relating to the use of machinery, including instructions on equipment capability and limitations
d
Action is taken promptly to report and/or rectify accidents and incidents in accordance with statutory requirements and company procedures
e
Work is completed systematically with required attention to detail
f
Recognises and adapts appropriately to cultural differences in the workplace, including modes of behaviour and interactions among crew and others


3
Context of assessment
a
Assessment of competency must comply with the assessment requirements of the relevant maritime regulations
b
Assessment of this unit must be undertaken within relevant marine authority approved and audited arrangements by a registered training organisation:

1
As a minimum, assessment of knowledge must be conducted through appropriate written/oral examinations, and

2
Appropriate practical assessment must occur:


i
at the registered training organisation; and/or


ii
on an appropriate working or training vessel

4

Specificresourcesrequired for assessment

Access is required to opportunities to:
a
operate a vessel simulator, meeting the requirements of Section A I/12 of the IMO STCW 95 Code, over an appropriate range of simulated manoeuvring situations, weather and loading conditions; and/or
b
manoeuvre a commercial vessel of 500 gross tonnage or more in an appropriate range of situations, weather and loading conditions
Replaces
State Code National Code Title Type
S2086 TDMMC101A Manoeuvre and handle a vessel of 500 gross tonnage or more under all conditions Unit of competency