Unit of competency Outline
Date retreived
22/07/2026 6:21 PM AWST
22/07/2026 6:21 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Undertake helicopter safety and escape
Undertake helicopter safety and escape
Unit of competency
National Code
PMAWHS214
PMAWHS214
State Code
AXM26
AXM26
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
061301 - Occupational Health And Safety
Original Release Date
05/08/2016
Nominal Hours
30
Description
This unit of competency covers the skills and knowledge required to exit a helicopter under abnormal conditions at sea.This unit of competency applies to personnel who are required to undertake pre-flight preparation, escape from an inverted and/or submerged helicopter, don and successfully employ a life jacket, deploy safety and emergency equipment, deploy life rafts and help other survivors.This unit of competency applies to all persons who regularly travel by helicopter, for example, to any of the following installations or facilities:offshore rig/installationfloating facility (e.g. floating storage and offloading (FSO), floating production, storage and offloading (FPSO), and floating liquefied natural gas (FLNG))support vessel.Some jurisdictions may require the holder of this unit to be licensed or certified and users should check with the relevant authorities.
Notes
Elements and Performance Criteria
1 Prepare for flight
- 1.1 Listen to and follow pre-flight instructions from pilot or boarding controller
- 1.2 Undertake pre-flight preparation, including wearing appropriate clothing and personal protective equipment (PPE), such as immersion suits and personal floatation devices (life jacket)
- 1.3 Check own gear for suitability, including covered footwear, long trousers, and no loose items or hats
- 1.4 Check the supplied safety gear is fitted and worn correctly
2 Board the helicopter
- 2.1 Approach helicopter as directed by the pilot or ground crew
- 2.2 Put on seat belt and hearing protection
- 2.3 Familiarise oneself with the helicopter layout
- 2.4 Locate and identify all the safety equipment
- 2.5 Locate and identify primary and secondary exits
- 2.6 Listen to instructions on emergency egress from the aircraft
3 Prepare for helicopter ditching
- 3.1 Facilitate a controlled and safe egress from a ditched helicopter from a knowledge of helicopter layout, including the location and operation of emergency exits and equipment
- 3.2 Secure personal items within the cabin prior to the evacuation to facilitate escape
- 3.3 Check harnesses, seat belts and life jackets to ensure that they are properly fastened and secured prior to the ditching in order to minimise personal injury or gear failure
- 3.4 Adopt the required brace position in order to allow for proper positioning prior to ditching
- 3.5 Acknowledge and respond to information communicated by the helicopter crew advising the nature and extent of the situation
4 Undertake evacuation from the helicopter
- 4.1 Identify appropriate primary and secondary escape routes in order to determine the locations through which the evacuation will be undertaken
- 4.2 Wait until rotors have stopped turning and all movement has ceased
- 4.3 Undo, in a controlled sequential manner, seat belts and harnesses to facilitate exit from the helicopter
- 4.4 Deploy available safety equipment as instructed in order to assist the individual's sea survival after evacuation has been safely completed
- 4.5 Acknowledge and respond to information communicated by the helicopter crew advising the nature and extent of the situation
5 Facilitate recovery process
- 5.1 Deploy position indicating devices and use appropriate signalling devices to facilitate the location of personnel by air-sea rescue group
- 5.2 Use emergency supplies and equipment to ensure that available supplies are maximised and are able to meet the nature and extent of the emergency
- 5.3 Apply appropriate helicopter/vessel rescue techniques to the recovery process
6 Control hazards
- 6.1 Identify and act upon potential hazards to minimise injury to personnel or damage to equipment
- 6.2 Manage use of life raft by applying knowledge of life raft operation and requirements
- 6.3 Apply suitable swimming techniques (whilst wearing life jacket) in the water in order to aid movement and boarding of the deployed life raft
- 6.4 Rescue and recover persons in the water, minimising further potential for injury through the appropriate raft boarding and righting techniques
- 6.5 Employ suitable techniques, both in the life raft and in the water, in order to delay the onset of hypothermia
- 6.6 Assess and treat hypothermia, as required
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W8827 | PMAOHS214B | Undertake helicopter safety and escape | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| AD584 | PMASS00025 | Offshore operator safety induction | Skill set |
| BAN1 | PMA20116 | Certificate II in Process Plant Operations | Qualification |
| BAM8 | PMA30116 | Certificate III in Process Plant Operations | Qualification |
| BAN0 | PMA40116 | Certificate IV in Process Plant Technology | Qualification |
| BEN8 | PUA30319 | Certificate III in Public Safety (Aquatic Search and Rescue) | Qualification |
| BIT5 | PUA30322 | Certificate III in Public Safety (Aquatic Search and Rescue) | Qualification |