Unit of competency Outline

Date retreived
22/07/2026 6:40 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Use basic finishing techniques on timber surfaces

Use basic finishing techniques on timber surfaces

Unit of competency
National Code
MSFFP2014
State Code
OEJ86
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
08/12/2022
View on TGA
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
030117 - Furniture Polishing
Original Release Date
19/04/2023
Nominal Hours
80
Description
This unit describes the skills and knowledge required to perform basic furniture finishing tasks on timber furniture items such as tables, chairs and stools. It includes preparation and hand or spray coating of surfaces using a limited range of tools, equipment and finishing techniques. Learners with his competency have basic skills to support further study or entry-level work in furnishing and furniture making industries. This unit is usually delivered within a pre-employment training program.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Plan and prepare for task
  • 1.1 Identify task requirements from work documentation and instructions
  • 1.2 Identify quality requirements in accordance with workplace practices
  • 1.3 Observe work health and safety requirements, including personal protection and safe handling requirements
  • 1.4 Select tools and equipment to meet task requirements, check they are safe and functional, and report any faults to supervisor
  • 1.5 Check that furniture item and materials meet task requirements, including quality requirements
2. Prepare surface and materials for finishing process
  • 2.1 Check that surfaces are free of contamination and are ready for finishing process according to workplace procedures and industry standards
  • 2.2 Identify products with surface or other faults and report and repair according to workplace procedures and industry standards
  • 2.3 Prepare materials for surface finishing in readiness for application
3. Prepare surface
  • 3.1 Apply stain to timber surfaces in accordance with manufacturer specifications and workplace procedures and standards
  • 3.2 Seal stained surface with polish using mop brush, blender or swooge
  • 3.3 Lightly sand sealed surface to make smooth
  • 3.4 Apply wood filler or sanding sealer in accordance with manufacturer specifications and workplace procedures
  • 3.5 Seal filled-in surface with oil varnish in accordance with manufacturer specifications and workplace procedures and standards
  • 3.6 Lightly sand sealed surface to make smooth
4. Apply finishing material
  • 4.1 Apply finishing material in accordance with manufacturer specifications until required build is achieved
  • 4.2 Cut back finishing material to remove surface defects or foreign material in accordance with workplace procedures and standards
  • 4.3 Burnish surface with fine steel wool and lubricating oil to achieve even sheen
5. Clean up work area
  • 5.1 Check, clear and store equipment and any unused materials in accordance with workplace procedures
  • 5.2 Clean work area and safely dispose of waste including wood filler and lubricating oil rags, showing regard for spontaneous combustion risks, in accordance with workplace procedures and environmental standards
  • 5.3 Complete required workplace records
No information
No information
Replaces
State Code National Code Title Type
WI312 MSFFF1001 Complete a basic furniture finishing project Unit of competency
State Code National Code Title Type
BIJ5 MSF10122 Certificate I in Furnishing Qualification
BIJ8 MSF20522 Certificate II in Furniture Making Pathways Qualification