Unit of competency Outline
Date retreived
23/07/2026 1:00 AM AWST
23/07/2026 1:00 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Prepare laboratory solutions and stains
Prepare laboratory solutions and stains
Unit of competency
National Code
FBPLAB2002
FBPLAB2002
State Code
OAO04
OAO04
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
18/04/2019
Field of Education
019909 - Laboratory Technology
Original Release Date
18/04/2019
Nominal Hours
40
Description
This unit of competency describes the skills and knowledge required to prepare a variety of solutions and stains for routine tests carried out in a standard laboratory setting.This unit applies to individuals who are responsible for preparing test solutions and stains required for standard analytical tests, determined by the scope and classification of the laboratory. All work must be carried out to comply with workplace procedures, in accordance with State/Territory work health and safety, and food safety regulations, legislation and standards that apply to the workplace.No occupational licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare materials and equipment
- 1.1 Identify and confirm job requirements
- 1.2 Identify and select standard methods for solution preparation in accordance with workplace procedures
- 1.3 Confirm availability of required materials, reagents and equipment
- 1.4 Confirm environmental guidelines and identify potential workplace health and safety hazards and controls according to workplace procedures
- 1.5 Select and fit appropriate personal protective equipment as per manufacturers' specifications
- 1.6 Select and assemble appropriate volumetric glassware and measuring equipment, materials and reagents as per requirements
- 1.7 Check shelf life of reagents and solutions and replace out-of-date or reject materials
2. Prepare solutions and stains
- 2.1 Follow standard workplace method to prepare solution or stain
- 2.2 Measure appropriate quantities of reagents for solution preparation as per requirements
- 2.3 Prepare solutions to achieve homogeneous mix of the specified concentration
- 2.4 Transfer solutions to appropriate containers in accordance with workplace procedures
- 2.5 Label containers with solution details and log details in laboratory register in line with workplace practices
- 2.6 Monitor shelf life of working solutions and dispose of those unfit for use, according to workplace procedures
3. Complete laboratory procedure
- 3.1 Clean and store glassware and equipment after use, and store reagents
- 3.2 Clean and sanitise equipment and work surfaces after use according to workplace requirements
- 3.3 Use aseptic techniques to ensure health and hygiene of self and others
- 3.4 Collect, treat and dispose of or recycle waste generated by the process in accordance with workplace waste management policies
- 3.5 Complete records according to workplace requirements
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| S7954 | FDFLAB2004A | Prepare laboratory solutions and stains | Unit of competency |