Unit of competency Outline

Date retreived
22/07/2026 1:21 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Analyse loads on frames and mechanisms

Analyse loads on frames and mechanisms

Unit of competency
National Code
MEM23121
State Code
OEV96
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
19/12/2022
View on TGA
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
030101 - Manufacturing Engineering
Original Release Date
19/04/2023
Nominal Hours
70
Description
This unit of competency defines the skills and knowledge required to analyse loads on mechanisms, frames and structural support elements including linkages, rods, shafts and beam elements within machines and mechanisms. It includes a focus on safe working practices, work health and safety (WHS) compliance requirements, function and features of frames and mechanisms, load and deflection analysis for static and dynamic elements, and traditional and software-based techniques.This unit applies to the analysis of loads on mechanisms, beams, frames and support elements either individually or with the assistance of a professional engineer for more complex calculations of loads and stresses. It is suitable for people working as mechanical detailers or designers and draftspersons, and for those pursuing careers and qualifications in mechanical engineering or related disciplines.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Establish scope of frame and mechanism analysis
  • 1.1 Determine compliance requirements of WHS and regulatory requirements, codes of practice, standards and risk assessment considerations for design and use of machines and equipment
  • 1.2 Identify features, functions, operating conditions and performance requirements of frames, beams and mechanisms
  • 1.3 Investigate sustainability implications of frames and mechanisms
  • 1.4 Review design loads, working stresses, allowable deformations and factor of safety for elements
  • 1.5 Review element arrangements, assembly and fastening methods
  • 1.6 Identify any complex load calculations to be done with, or obtained from, a professional engineer
  • 1.7 Establish availability of technical and professional assistance
  • 1.8 Identify and evaluate appropriate analysis techniques, software and software validation techniques
  • 1.9 Identify stakeholders to be consulted on selection tasks
2. Analyse loads and performance of frames and mechanisms
  • 2.1 Estimate static and dynamic operating conditions and determine design or selection parameters
  • 2.2 Optimise frame, beam and mechanism elements for strength, deflection, arrangement and fastening
  • 2.3 Review analysis with stakeholders and make any required adjustments
  • 2.4 Confirm compliance of frames and mechanisms with WHS and regulatory requirements, standards and codes of practice
3. Report results
  • 3.1 Record results of analysis
  • 3.2 Provide documentation including calculations, specifications diagrams and drawings
No information
No information
Replaces
State Code National Code Title Type
WE936 MEM23121A Analyse loads on frames and mechanisms Unit of competency
State Code National Code Title Type
BOY9 MEM80125 Graduate Diploma of Engineering Qualification
BIW5 MEM60122 Advanced Diploma of Engineering Qualification