Unit of competency Outline

Date retreived
22/07/2026 6:32 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Scarf edges of veneer

Scarf edges of veneer

Unit of competency
National Code
FWPWPP2207
State Code
AXJ45
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
13/05/2016
View on TGA
State Implementation and Classification
Approved Date
05/10/2016
Field of Education
030111 - Wood MacHining And Turning
Original Release Date
05/10/2016
Nominal Hours
15
Description
This unit of competency describes the outcomes required to overlap the end or edge of one piece of veneer over the end or edge of another (scarfing) to optimise its use in readiness for bonding to panel products.The unit applies to production workers who scarf edges of veneer in a forest and wood products factory setting and includes operator maintenance.No licensing, legislative, regulatory, or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for scarfing
  • 1.1 Review work order and where required check with appropriate personnel.
  • 1.2 Select appropriate personal protective equipment and check for operational effectiveness.
  • 1.3 Obtain type and quantity of veneer to be scarfed from veneer production process.
  • 1.4 Plan scarfing sequence and angle in line with work order.
2. Scarf veneer
  • 2.1 Use equipment in line with organisational safety procedures, manufacturer’s instructions and environmental protection practices.
  • 2.2 Complete pre start-up equipment checks to ensure operational effectiveness.
  • 2.3 Set machine functions and feed rate for optimal product recovery.
  • 2.4 Select scarfing method in line with veneer being joined.
  • 2.5 Position veneer and feed at appropriate rate for machine speed and capacity, veneer condition and thickness.
  • 2.6 Scarf veneer to specification and assess veneer visually throughout scarfing process for strength and production defects.
  • 2.7 Coordinate out-feed to ensure efficient recovery of scarfed material.
3. Redistribute material
  • 3.1 Assess joins and grade scarfed veneer in line with organisational procedures and industry standards.
  • 3.2 Direct material to storage or processing operations in line with work order.
  • 3.3 Dispose of sub-standard material in line with environmental protection practices.
  • 3.4 Clean work area in line with organisational safety procedures.
4. Complete operator maintenance
  • 4.1 Follow organisational safety procedures to lock out equipment.
  • 4.2 Check cutters or blades for bluntness or damage.
  • 4.3 Remove and replace cutters or blades in line with manufacturer's recommendations.
  • 4.4 Keep machine clear of dust and debris in line with organisational safety procedures.
  • 4.5 Record and report production outcomes, equipment faults and maintenance requirements to appropriate personnel.
No information
No information
Replaces
State Code National Code Title Type
D6111 FPIWPP2207B Scarf edges of veneer Unit of competency
State Code National Code Title Type
BAK9 FWP20416 Certificate II in Wood Panel Products Qualification