Unit of competency Outline

Date retreived
22/07/2026 7:23 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Fabricate and install fluid power hose assemblies

Fabricate and install fluid power hose assemblies

Unit of competency
National Code
AURTTA012
State Code
AXB04
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030701 - Mechanical Engineering
Original Release Date
13/07/2016
Nominal Hours
30
Description
This unit describes the performance outcomes required to fabricate and install fluid power hose assemblies. It involves preparing for the task, fabricating, installing and testing fluid power hoses according to relevant industry standards, and completing workplace processes and documentation.It applies to those working in the automotive service and repair industry. The hose assemblies include those of agricultural machinery, heavy commercial vehicles, mobile plant machinery or outdoor power equipment.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to fabricate fluid power hose assembly
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Fluid power hose fabrication procedures and information are sourced and interpreted
  • 1.3 Options are analysed and selected
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Tools and equipment are selected and checked for serviceability
2. Fabricate assembly
  • 2.1 Fluid power hose and fittings are identified and selected according to manufacturer specifications and workplace procedures
  • 2.2 Fluid power hose is fabricated according to relevant industry standards, manufacturer specifications, workplace procedures, and safety and environmental requirements
3. Install and test assembly
  • 3.1 Procedures and information for hose installation are sourced and interpreted
  • 3.2 Fluid power hose is installed and tested according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  • 3.3 Test results are documented and reported according to workplace procedures
4. Complete work processes
  • 4.1 Final inspection is made to ensure work is to workplace expectations and machinery is presented ready for use
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • 4.3 Tools and equipment are checked and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF380 AURTTA3012 Manufacture and install fluid power hose assemblies Unit of competency