Unit of competency Outline

Date retreived
22/07/2026 7:55 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Interpret, produce and modify electrotechnology drawings

Interpret, produce and modify electrotechnology drawings

Unit of competency
National Code
UEECD0064
State Code
OEF62
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
24/10/2022
View on TGA
State Implementation and Classification
Approved Date
10/02/2023
Field of Education
031301 - Electrical Engineering
Original Release Date
10/02/2023
Nominal Hours
36
Description
This unit involves the skills and knowledge required to interpret, produce and modify electrotechnology drawings.It includes interpreting circuit, wiring and mechanical diagrams, equipment and cable/connection schedules and manuals; producing and modifying a range of electrical drawings; and using computer drawing packages to produce and modify drawings.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Interpret electrical drawings and diagrams
  • 1.1 Type of drawings and diagrams is determined from the nature of work to be undertaken
  • 1.2 Relevant drawings, diagrams, site plans and cable/connection schedules or manuals required for the work to be undertaken are determined and obtained
  • 1.3 Drawings, diagrams and cable/connection schedules are interpreted using drawing layouts, conventions and symbols
  • 1.4 Information is extracted from drawings and diagrams for application to the work to be undertaken
  • 1.5 Technical data of system components is interpreted
2 Produce electrical drawings
  • 2.1 Drawing conventions are applied in neat and legible freehand drawings to convey information and ideas relevant to the work to be undertaken
  • 2.2 Correct drawing/diagram type is produced in accordance with job requirements
  • 2.3 Technical data of system components to determine parameters is included in drawings
  • 2.4 Drawings are checked for accuracy and compliance with requirements
  • 2.5 Completed drawings are submitted to relevant person for review
3 Modify electrical drawings
  • 3.1 Drawing conventions are used to modify drawings in accordance with requirements
  • 3.2 Technical data of system components is modified in drawings
  • 3.3 Modified drawings are checked for accuracy and compliance with requirements
  • 3.4 Modified drawings are submitted to relevant person for review
4 Use computer drawing packages
  • 4.1 Relevant computer drawing package software is used to produce drawings based on industry standard protocols
  • 4.2 Relevant computer drawing package software is used to modify drawings based on industry standard protocols
  • 4.3 Drawings are checked for accuracy and compliance with requirements
  • 4.4 Completed drawings are stored in accordance with requirements
No information
No information
No information
State Code National Code Title Type
BHZ3 UEE62122 Advanced Diploma of Engineering Technology - Electrical Qualification