Unit of competency Outline
Date retreived
22/07/2026 6:26 AM AWST
22/07/2026 6:26 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Represent mechanical engineering designs
Represent mechanical engineering designs
Unit of competency
National Code
MEM09141A
MEM09141A
State Code
W5411
W5411
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
30/06/2011
Field of Education
030701 - Mechanical Engineering
Original Release Date
30/06/2011
Nominal Hours
60
Description
This unit defines the competencies required to represent the design of mechanical and manufacturing engineering products, processes, systems or services using appropriate graphical techniques, specifications and documentation. Work would typically be carried out as part of a design team.
Notes
Elements and Performance Criteria
1. Clarify product, process, system or service design requirements
- 1.1. The design specification of the required product, process, system or service is discussed and clarified with the client and design team.
2. Apply graphical techniques to produce the initial product, process, system or service design representation
- 2.1. The initial graphical representation satisfies the design specification, manufacturing and operational requirements, safety and related standards.
- 2.2. Engineering calculations were made, engineering references, standards and codes used appropriately to determine dimensions, limits and fits, surface textures, datum references and geometric tolerances.
- 2.3. Initial design representation identifies materials, manufacturing methods and processes.
- 2.4. Initial production graphics, specifications and operating and maintenance instructions/manuals are prepared in accordance with the agreed design concept and organisational requirements using chosen graphical techniques.
3. Validate the product, process, system or service representation
- 3.1. The suitability of the product, process, system or service design graphical representation is confirmed with the client, other team members and organisational requirements.
4. Develop, validate, implement and file design graphics and specifications and procedural documentation
- 4.1. Design graphics, specifications and instructions for the product, process, system or service are prepared in accordance with the agreed design concept and organisational requirements and incorporate feedback on initial design graphics and documents.
- 4.2. The production graphics, specifications and instructions for the product, process, system or service are checked with the client, design team and other affected persons for suitability prior to implementation.
- 4.3. Implementation installation and commissioning feedback is responded to in accordance with organisational requirements.
- 4.4. The validated production graphics, specifications and instructions for the product process, system or service are maintained throughout the implementation, installation and commissioning processes, processed and filed in accordance with organisational requirements.
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Graphical representation
Manual or CAD software and techniques include sketching and layout techniques, reading, interpreting of drawings, documentation and design briefs, use of organisation protocols for graphics development, use of industry standards and codes of practice, multimedia presentation techniques, basic software customisation techniques, 3D and orthographic techniques, basic file management techniques
Design graphics, specifications and instructions
May include those prescribed within the organisation's policies and procedures and those required by relevant statutory regulations and requirements
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Graphical representation
Manual or CAD software and techniques include sketching and layout techniques, reading, interpreting of drawings, documentation and design briefs, use of organisation protocols for graphics development, use of industry standards and codes of practice, multimedia presentation techniques, basic software customisation techniques, 3D and orthographic techniques, basic file management techniques
Design graphics, specifications and instructions
May include those prescribed within the organisation's policies and procedures and those required by relevant statutory regulations and requirements
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to represent the design of mechanical and manufacturing engineering products, processes, systems or services for a range of general engineering applications. Competency in this unit cannot be claimed until all prerequisites have been satisfied.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.
Context of and specific resources for assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.
This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with represent the design of mechanical and manufacturing engineering products, processes, systems or services or other units requiring the exercise of the skills and knowledge covered by this unit.
Method of assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.
Guidance information for assessment
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to represent the design of mechanical and manufacturing engineering products, processes, systems or services for a range of general engineering applications. Competency in this unit cannot be claimed until all prerequisites have been satisfied.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.
Context of and specific resources for assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.
This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with represent the design of mechanical and manufacturing engineering products, processes, systems or services or other units requiring the exercise of the skills and knowledge covered by this unit.
Method of assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.
Guidance information for assessment
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WE901 | MEM09157A | Perform mechanical engineering design drafting | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| D535 | MEM60111 | Advanced Diploma of Engineering | Qualification |
| W249 | MEM60105 | Advanced Diploma of Engineering | Qualification |
| W248 | MEM50205 | Diploma of Engineering - Technical | Qualification |