Unit of competency Outline

Date retreived
22/07/2026 6:07 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Select, transfer and remove materials and products

Select, transfer and remove materials and products

Unit of competency
National Code
MSTGN2021
State Code
OBL78
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
31/01/2020
View on TGA
State Implementation and Classification
Approved Date
06/05/2020
Field of Education
089901 - Purchasing, Warehousing And Distribution
Original Release Date
06/05/2020
Nominal Hours
40
Description
This unit of competency describes the skills and knowledge required to select, transfer and remove materials and products in support of production processes. This unit applies to all sectors of the textiles, clothing and footwear (TCF) industry and in a variety of environments, including operational workplace activities, restricted space, and hazardous controlled or exposed conditions.Work may be conducted in small to large scale enterprises and may involve individual and team activities.This unit does not cover the use of a forklift. No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Determine requirements
  • 1.1 Review work requests and confirm requirements
  • 1.2 Organise, confirm and record tasks in accordance with workplace procedures
  • 1.3 Select, check and correctly use required personal and other safety equipment,
  • 1.4 Identify and organise appropriate equipment for transferring materials
2. Select materials and products
  • 2.1 Interpret documentation and identify codes and references indicating source, customer, storage location or batch
  • 2.2 Identify and select materials or products to be loaded or unloaded
  • 2.3 Document and report non-conforming materials and products
  • 2.4 Update transfer and store documentation
3. Load, unload and transfer materials or products
  • 3.1 Use suitable equipment (other than forklift) to load and unload materials according to job requirements, safe work practices and correct manual handling techniques
  • 3.2 Transfer materials to correct destination
  • 3.3 Apply environmental requirements and procedures in relation to waste, pollution and recycling of materials at all stages of the handling process
  • 3.4 Maintain and clean materials, equipment and work environment in accordance with workplace procedures
  • 3.5 Accurately complete required documentation associated with tasks
No information
No information
Replaces
State Code National Code Title Type
BAW01 MSTGN2007 Select, transfer and remove materials and products Unit of competency