Unit of competency Outline
Date retreived
22/07/2026 10:54 PM AWST
22/07/2026 10:54 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Operate drop cutting machines
Operate drop cutting machines
Unit of competency
National Code
LMFSF3001B
LMFSF3001B
State Code
W8771
W8771
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
30/09/2008
Field of Education
030717 - Plant And Machine Operations
Original Release Date
30/09/2008
Nominal Hours
24
Description
This unit covers the competency to use drop cutting machines.
Notes
Elements and Performance Criteria
1. Identify drop cutting machine controls, adjustments and work procedures
- 1.1. Job requirements are identified from workplace approved operating procedures
- 1.2. Equipment components, adjustment points and controls are identified
- 1.3. Operating procedures are checked to identify approved operating range and adjustments
- 1.4. Equipment operations and production procedures are identified
- 1.5. The process for obtaining materials and moving products to the next process is identified
2. Plan and prepare for work
- 2.1. Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition
- 2.2. Inspection procedure for materials quality and equipment condition is identified
- 2.3. Work sequence is planned to suit job
- 2.4. OH&S requirements, including ergonomic criteria and personal protection needs, are observed throughout the work
- 2.5. Equipment emergency stops and guards are identified
- 2.6. Machine checking procedures are identified
- 2.7. Any required supplementary equipment is identified for routine lubrication and adjustments of the equipment
3. Set and operate drop cutting machine
- 3.1. Fabric length and angle of cut are set on the drop cutting machine following work order
- 3.2. Fabric is fixed to the machine using appropriate hooks or other fasteners
- 3.3. Fabric is checked for flaws prior to cutting
- 3.4. Fabric use minimises waste materials
- 3.5. Cutting operations provide the required product quality standards, work outputs and minimisation of waste
- 3.6. Problems are identified and reported following workplace procedures
- 3.7. Cut lengths are checked for required quality, and moved to the next process
- 3.8. Waste and scrap is dealt with following workplace procedures
- 3.9. Equipment and work area clean up are completed following workplace procedures
4. Identify quality requirements
- 4.1. Process is monitored and conditions which may affect quality standards are reported
- 4.2. Observed requirements for repairs or maintenance are identified and reported to appropriate personnel
- 4.3. Authorised changes to settings or operating procedures are implemented
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit scope
This unit covers work involving the operation of drop cutting machines.
Materials to be machined may include:
synthetic or natural fabrics, used for:
curtains
internal or external blinds
awnings and shade wings
Unit context
OHS requirements may include legislation, building codes, material safety management systems, hazardous and dangerous goods codes and local safe operating procedures or equivalent
Work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements
Work requires individuals to demonstrate discretion, judgement and problem solving skills in the set up and operation of machines. This may be demonstrated either individually or in a team environment
Machine checking procedures may include:
materials inputs and outputs
cutting blade condition
attachments and ancillary equipment
quality requirements for the process stage
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices
Information and procedures
Machine manufacturer specifications and operational procedures
Workplace procedures relating to the setting and operation of machinery
Work instructions, including job sheets, cutting lists, plans, drawings and designs
Workplace procedures relating to reporting and communication
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit scope
This unit covers work involving the operation of drop cutting machines.
Materials to be machined may include:
synthetic or natural fabrics, used for:
curtains
internal or external blinds
awnings and shade wings
Unit context
OHS requirements may include legislation, building codes, material safety management systems, hazardous and dangerous goods codes and local safe operating procedures or equivalent
Work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements
Work requires individuals to demonstrate discretion, judgement and problem solving skills in the set up and operation of machines. This may be demonstrated either individually or in a team environment
Machine checking procedures may include:
materials inputs and outputs
cutting blade condition
attachments and ancillary equipment
quality requirements for the process stage
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices
Information and procedures
Machine manufacturer specifications and operational procedures
Workplace procedures relating to the setting and operation of machinery
Work instructions, including job sheets, cutting lists, plans, drawings and designs
Workplace procedures relating to reporting and communication
EVIDENCE GUIDE
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical aspects of evidence
Apply safe handling practices for equipment, products and materials
Identify and operate machine controls and guards
Set depth and angle of cut to specification
Interpret work order and locate and apply relevant information
Operate drop cutting machine to cut at least five different types of material or fabric
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self and others
prevent damage to goods, equipment and products
maintain required production output and product quality
Work effectively with others
Modify activities to cater for variations in workplace contexts and environment
Resource implications
Drop cutting machines, work orders, equipment operating procedures, fabric for cutting.
Method of assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment should be conducted over time and will generally be in conjunction with assessment of other units of competency.
Context of assessment
Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines.
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical aspects of evidence
Apply safe handling practices for equipment, products and materials
Identify and operate machine controls and guards
Set depth and angle of cut to specification
Interpret work order and locate and apply relevant information
Operate drop cutting machine to cut at least five different types of material or fabric
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self and others
prevent damage to goods, equipment and products
maintain required production output and product quality
Work effectively with others
Modify activities to cater for variations in workplace contexts and environment
Resource implications
Drop cutting machines, work orders, equipment operating procedures, fabric for cutting.
Method of assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment should be conducted over time and will generally be in conjunction with assessment of other units of competency.
Context of assessment
Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W0385 | LMFSF3001A | Operate drop cutting machines | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WI630 | MSFSF3001 | Operate drop cutting machines | Unit of competency |
