Unit of competency Outline

Date retreived
22/07/2026 9:53 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Test and service 240 volt portable generators

Test and service 240 volt portable generators

Unit of competency
National Code
AURPTR001
State Code
AXB68
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
10
Description
This unit describes the performance outcomes required to test and service 240 volt portable generators according to manufacturer specifications. It involves preparing for the task, testing and servicing the equipment, performing post-service testing, and completing workplace processes and documentation.It applies to those working in the outdoor power equipment service and repair industry. The portable generators may be driven by petrol or diesel engines. Testing and servicing relates only to the 240 volt generator, and not the engine driving the generator.Licensing, legislative, regulatory or certification requirements may apply to this unit in some jurisdictions. Users are advised to check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1. Prepare to undertake load test of portable generator
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Test and service procedures and information are sourced and interpreted
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Load testing equipment and tools are selected and checked for serviceability
2. Conduct test and interpret results
  • 2.1 Load test is carried out according to manufacturer specifications, workplace procedures and safety requirements
  • 2.2 Test results are compared with manufacturer specifications to determine service requirements
  • 2.3 Authorisation to proceed is obtained according to workplace procedures
3. Prepare to service generator
  • 3.1 Service options are analysed and those most appropriate to the circumstances are selected
  • 3.2 Tools, equipment and materials are selected and checked for serviceability
4. Service generator
  • 4.1 Components are serviced, adjusted and replaced according to manufacturer specifications, workplace procedures, and safety requirements, and without causing damage to components or systems
  • 4.2 Generator is run and resistive load test is compared with manufacturer specifications
5. Complete work processes
  • 5.1 Final inspection is made to ensure work is to workplace expectations and generator is presented ready for use, including protective guards, cowlings and safety features
  • 5.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • 5.3 Tools and equipment are checked and stored according to workplace procedures
  • 5.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF308 AURPTR3001 Test and service 240V portable generators Unit of competency
Replaced By
State Code National Code Title Type
OCL53 AURPTR101 Test and service 240 volt portable generators Unit of competency