Unit of competency Outline

Date retreived
22/07/2026 11:26 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Develop fibre-composite products using cored-laminate techniques

Develop fibre-composite products using cored-laminate techniques

Unit of competency
National Code
PMBTECH507
State Code
BAH93
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
22/06/2016
View on TGA
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
030305 - Materials Engineering
Original Release Date
05/08/2016
Nominal Hours
50
Description
This unit of competency covers the skills and knowledge required to develop designs for 'sandwich type' fibre-composite laminates. This unit of competency applies to the design of new sandwich products using the range of materials and techniques which are standard within a particular enterpriseThis unit of competency applies to experienced technicians or those in similar roles who are required to apply in-depth knowledge of materials, process, equipment and problem solving in order to determine appropriate materials and processes to meet design objectives; determine appropriate equipment and process settings and adjustments; develop drawings of new product; and solve technical problems associated with the design and manufacturing procedures.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Confirm product specification
  • 1.1 Confirm physical/structural properties required of product
  • 1.2 Confirm other requirements of product
  • 1.3 Identify relevant regulations/standards/codes of practice which may be applicable
  • 1.4 Draw/use hand sketch to confirm product size and shape
2 Identify technical requirements
  • 2.1 Determine the laminate properties appropriate for the job
  • 2.2 Select the appropriate core material(s)
  • 2.3 Select the appropriate resin, matrix and other materials
  • 2.4 Determine joints, attachment points and other special features required
  • 2.5 Determine lay-up technique to be used
3 Develop specification for manufacturing product
  • 3.1 Develop technical/engineering drawing of new product to company required standards
  • 3.2 Develop material list/specification for new product
  • 3.3 Develop manufacturing procedures/specifications for new product
  • 3.4 Complete required documentation
4 Make trial samples, as required
  • 4.1 Liaise with production and other relevant people to ensure specifications/procedures are clear, adequate and understood
  • 4.2 Provide technical expertise to the production process as required to facilitate manufacture
  • 4.3 Test samples for function and quality
  • 4.4 Modify designs where necessary to meet manufacturing and other requirements
5 Anticipate and solve problems
  • 5.1 Recognise a problem or a potential problem
  • 5.2 Determine possible cause
  • 5.3 Refer problems outside area of responsibility to appropriate person, with possible cause
  • 5.4 Seek information and assistance as required, to solve problems
  • 5.5 Solve problems within area of responsibility
  • 5.6 Follow through items initiated until final resolution has occurred
No information
No information
Replaces
State Code National Code Title Type
W7701 PMBTECH507B Develop fibre composite products using cored-laminate techniques Unit of competency
Replaced By
State Code National Code Title Type
ODB37 PMBTECH507E Develop fibre-composite products using cored-laminate techniques Unit of competency
State Code National Code Title Type
BCU8 PMB60116 Advanced Diploma of Polymer Technology Qualification
BCT8 PMB50116 Diploma of Polymer Technology Qualification