Unit of competency Outline

Date retreived
23/07/2026 12:12 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Assemble and install reception antennae and signal distribution equipment

Assemble and install reception antennae and signal distribution equipment

Unit of competency
National Code
UEEEC0002
State Code
OBX56
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
05/10/2020
View on TGA
State Implementation and Classification
Approved Date
12/07/2021
Field of Education
031317 - Electronic Equipment Servicing
Original Release Date
12/07/2021
Nominal Hours
54
Description
This unit involves the skills and knowledge required to assemble and install reception antennae and signal distribution equipment.It includes preparing to install and set up reception antennae and signal distribution systems, installing and setting up reception antennae and signal distribution systems and reporting.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare to install and setup reception antennae and signal distribution systems
  • 1.1 Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for relevant work area are identified, obtained and applied
  • 1.2 Risk control measures are applied in accordance with workplace procedures prior to commencing work
  • 1.3 Risks/hazards are identified, assessed and reported to relevant person/s, and control measures implemented
  • 1.4 Nature and location of the work is obtained from relevant person/s to determine the scope of work
  • 1.5 Instructions for coordinating work with others is obtained from relevant person/s and applied
  • 1.6 Materials required for work are determined in accordance with workplace procedures
  • 1.7 Tools, equipment and testing devices required for work are obtained and checked for correct operation and safety
2 Install reception antennae and signal distribution systems
  • 2.1 Workplace risk control measures and workplace procedures are applied
  • 2.2 Circuits/components are checked and isolated, as required, in accordance with WHS/OHS requirements and workplace procedures
  • 2.3 Optimum location for installation of antenna is determined from signal tests and limitations imposed by the customer and relevant regulations
  • 2.4 Accessories are installed straight and square in required locations and within acceptable tolerances
  • 2.5 Cables and conductors are terminated at accessories in accordance with manufacturer specifications and regulatory requirements
  • 2.6 Unplanned events are reported to relevant person/s in accordance with workplace procedures
  • 2.7 Installation is conducted efficiently without waste of materials, damage to apparatus, circuits or the surrounding environment applying sustainable energy practices
3 Setup reception antennae and signal distribution systems and report
  • 3.1 WHS/OHS work completion risk control measures and workplace procedures are followed
  • 3.2 Adjustments are made to the antenna and the system to optimise reception at each outlet
  • 3.3 Worksite is cleaned and made safe in accordance with workplace procedures
  • 3.4 Relevant person/s is notified of completion of installation work in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WC538 UEENEEH108A Assemble and install reception antennae and signal distribution equipment Unit of competency