Unit of competency Outline

Date retreived
22/07/2026 2:38 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Establish and monitor production inventory requirements

Establish and monitor production inventory requirements

Unit of competency
National Code
MSFFT4004
State Code
WI453
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
20/06/2014
Field of Education
089901 - Purchasing, Warehousing And Distribution
Original Release Date
20/06/2014
Nominal Hours
36
Description
This unit of competency covers determining, specifying and documenting the production materials and consumables required for the production of mass-produced and customised fittings, equipment and assemblies. It does not cover the management of the inventory.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Identify materials requirements
  • 1.1 Drawings and specifications for materials are read and interpreted
  • 1.2 Sources of product supply are identified
  • 1.3 Normal quantity supply and matching storage facilities and equipment are identified
  • 1.4 Material safety data sheets (MSDS) or other supplier safety information are read and any relevant engineering controls or personal protection equipment are identified, and any additional resources required for safe workplace handling and storage of the materials are documented and reported
  • 1.5 Procedures to deal with fire or explosion risk, spills or injury are identified and recorded
2 Monitor consumables and production materials
  • 2.1 Consumables and production materials are checked for conformity to design specification and capacity to meet the requirements of the end product
  • 2.2 Any non-conformity in materials is noted and possible causes investigated and documented, including any variations, which may need to be made to the production process or materials used
  • 2.3 Materials and consumables are compared with competitive products, market information and recommendations are made on preferred options
  • 2.4 Preparation procedures for consumables and production materials are identified and checked for required additives, consumables and other materials or equipment requirement
  • 2.5 Materials ordering, storage, safe movement and waste disposal needs are identified
3 Document materials estimates
  • 3.1 All procedures for the estimates process are checked for conformity with workplace procedures
  • 3.2 Cost reports, including time and maintenance, are prepared
  • 3.3 Estimates are authorised by appropriate personnel for implementation
  • 3.4 Recommendations for variations to materials specifications are made to appropriate personnel
No information
No information
No information
State Code National Code Title Type
J742 MSF40213 Certificate IV in Furniture Design and Technology Qualification