Unit of competency Outline

Date retreived
22/07/2026 1:09 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Hand render pictorials

Hand render pictorials

Unit of competency
National Code
CPCCSG3010
State Code
BBB09
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
09/09/2016
View on TGA
State Implementation and Classification
Approved Date
23/01/2017
Field of Education
040325 - Painting, Decorating And Sign Writing
Original Release Date
23/01/2017
Nominal Hours
32
Description
This unit of competency specifies the outcomes required to produce and lay out hand-rendered pictorial images that form signs on a range of surfaces.The unit supports sign manufacturers who work on site, painting the required sign directly on to a surface, using a range of paints, brushes and application techniques.No licensing, legislative, regulatory or certification requirements apply to this unit of competency at the time of endorsement.
Notes
Elements and Performance Criteria
1 Plan and prepare work.
  • 1.1 Job requirements are identified from drawings and instructions, confirmed, and applied to planning and preparation.
  • 1.2 Material quantities are estimated according to size of sign and materials to be used.
  • 1.3 Health and safety requirements are identified according to specified tasks and workplace operations, and are applied to planning.
  • 1.4 Substrate is identified and prepared according to planned material application.
  • 1.5 Tools, equipmentand materials are selected to carry out tasks according to job requirements and relevant Australian standards.
  • 1.6 Layout is set out to scale.
  • 1.7 Colour selection is determined consistent with job requirements and colours are recorded for future use.
2 Produce illustration.
  • 2.1 Drawing instruments, media and background materials are selected and prepared according to job requirements.
  • 2.2 Illustration is reproduced from design or drawing applying accurate proportion and perspective.
  • 2.3 Light and shade effects are applied to illustration creating visual realism using techniques suitable to the selected medium.
3 Paint illustration.
  • 3.1 Painting techniques are applied to illustration according to job requirements.
  • 3.2 Accurate visual texture, light and shade are applied to the illustration.
  • 3.3 Colours are applied, achieving correct tones and tonal order.
  • 3.4 Lettering and illustration are applied to pictorial sign accurately and cleanly.
  • 3.5 Completed illustration is checked for accuracy and completeness and any defects are rectified according to job requirements.
4 Clean up and finish sign.
  • 4.1 Sign and surrounding surface environment are cleaned and waste materials removed according to statutory and regulatory authority requirements.
  • 4.2 Tools and equipment, including personal protective equipment (PPE), are cleaned, maintained and stored according to workplace requirements.
No information
No information
Replaces
State Code National Code Title Type
W9536 CPCCSI3010A Hand render pictorials Unit of competency
State Code National Code Title Type
BDJ3 CPC30216 Certificate III in Signs and Graphics Qualification