Accredited course Outline
Date retreived
22/07/2026 11:22 AM AWST
22/07/2026 11:22 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Unspecified Code Metal Fabrication.welding.sheetmetal
Unspecified Code Metal Fabrication.welding.sheetmetal
Accredited course
National Code:
State Code:
1100
1100
TGA Status:
Draft
Draft
DTWD Status:
Approved
Approved
State Implementation and Classification
Approved Date
Field of Education
030711 - Boilermaking And Welding
AQF Level
Unspecified Code
Nominal Hours
932
Duration
Unspecified
Stream of Study
Partial Exemption to Recognised Trades Course (3211)
Accredited Date
Expiry Date
VET Act Classifier
C
VET Act Conditions
Description
To provide the student with technical training
equivalent to 1A and 1B of the TAFE segment of the
apprenticeship course in Metal Fabrication, Welding
and Sheetmetal.
To enhance skill development in all aspects of the
trade enabling the student to equal the level of
training of an industrial apprentice who has
completed one year of an apprenticeship.
Schedule
1. CORE
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 63129 | Communication (Common Core) | 34 | Module | |
| 63133 | Communication (Trades) | 34 | Module | |
| 85293 | Metal Fabrication App 1a | 144 | Module | |
| 85294 | Metal Fabrication App 1b | 144 | Module | |
| 85132 | Sheetmetal App 1a | 144 | Module | |
| 85133 | Sheetmetal App 1b | 144 | Module | |
| 98002 | Supplementary Practical Skills 1a | 68 | Module | |
| 98003 | Supplementary Practical Skills 1b | 68 | Module | |
| 85373 | Trade Mathematics A | 34 | Module | |
| 85374 | Trade Mathematics B | 34 | Module |
No information
VET Info Notes
1 The subjects 98002 and 98003 each have a duration of 108 hours in this
course.
2 REMEDIAL EDUCATION
The primary responsibility for initiating
remedial action necessary in the areas of
technical training related trade subjects
rests with the individual lecturer.
3 ACCREDITATION
On successful completion of the technical
training section of the course, the student
shall be credited with subjects 1A and 1B of
the Metal Fabrication and the Sheetmetal
apprenticeship course.
4 SUPPLEMENTARY PRACTICAL SKILLS
Factory and on-site visits should be
undertaken when available and relevant.
On-site and on-campus real work to be
undertaken when relevant work available.
5 CERTIFICATE OF PRE-APPRENTICESHIP STUDIES
To be eligible for the Certificate of
Pre-Apprenticeship Studies the student must
gain a pass standard in each subject of the
certificate.
6 NEW APPRENTICE TRAINING AND ASSESSMENT SCHEME
For an apprentice to be eligible for a
DEPARTMENT OF EMPLOYMENT AND TRAINING
TRADE CERTIFICATE, the apprentice must have
achieved the competencies as determined by the
rules of the appropriate Trade Training
Schedule (TTS).
Achievement of College listed competencies for
each apprentice, as listed in the TTS, is to
be recorded on the appropriate Trade Training
Schedule Assessment forms.
The Division of Industrial Training (DIT) will
require a completed College assessment report
at the conclusion of the apprentice's College
training. This report is to be forwarded to DIT prior to the close of
College business in the year of completion.
course.
2 REMEDIAL EDUCATION
The primary responsibility for initiating
remedial action necessary in the areas of
technical training related trade subjects
rests with the individual lecturer.
3 ACCREDITATION
On successful completion of the technical
training section of the course, the student
shall be credited with subjects 1A and 1B of
the Metal Fabrication and the Sheetmetal
apprenticeship course.
4 SUPPLEMENTARY PRACTICAL SKILLS
Factory and on-site visits should be
undertaken when available and relevant.
On-site and on-campus real work to be
undertaken when relevant work available.
5 CERTIFICATE OF PRE-APPRENTICESHIP STUDIES
To be eligible for the Certificate of
Pre-Apprenticeship Studies the student must
gain a pass standard in each subject of the
certificate.
6 NEW APPRENTICE TRAINING AND ASSESSMENT SCHEME
For an apprentice to be eligible for a
DEPARTMENT OF EMPLOYMENT AND TRAINING
TRADE CERTIFICATE, the apprentice must have
achieved the competencies as determined by the
rules of the appropriate Trade Training
Schedule (TTS).
Achievement of College listed competencies for
each apprentice, as listed in the TTS, is to
be recorded on the appropriate Trade Training
Schedule Assessment forms.
The Division of Industrial Training (DIT) will
require a completed College assessment report
at the conclusion of the apprentice's College
training. This report is to be forwarded to DIT prior to the close of
College business in the year of completion.
No information