Accredited course Outline
22/07/2026 7:58 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate IV in Engineering (electrical)
Certificate IV in Engineering (electrical)
5063
5409
Draft
Approved
State Implementation and Classification
Description
To provide formal training to technician status in the electrical industry and
to develop in the student the ability.
To apply, with guidance, less complex techniques and practical knowledge to
limited specialised technical tasks.
To engage upon highly skilled manual work and exercise associated cognitive
skills in the operation and manipulation of complex equipment and systems.
To apply standard operational and diagnostic techniques to complex equipment
and systems, or undertake laboratory testing functions.
To become a team leader, and with further experience, assume managerial
responsibilities for groups of technician or trade functions.
Schedule
1. CORE
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 43306 | EA050 | Engineering Computing | 36 | Module |
| 43308 | EA061 | Engineering Graphics | 36 | Module |
2. ELECTIVES
1 Group 1 must be completed by Year 12 entry students. Trade entry or equivalent may select from Group 1 or 2 (see General Note 3). GROUP 1
3. ELECTIVES
GROUP 2
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 86993 | NE076 | Ac Motor Control | 54 | Module |
| 43412 | EA100 | Analogue Electronics 1 | 36 | Module |
| 43413 | EA101 | Analogue Electronics 2 | 36 | Module |
| 43577 | EA904 | Control Concepts | 36 | Module |
| 86994 | NE077 | Dc Motor Control | 54 | Module |
| 43716 | EA185 | Digital Applications | 36 | Module |
| 43663 | EA187 | Introduction to C | 36 | Module |
| 43662 | EA704 | Mechanical Systems | 54 | Module |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| 5393 | 50949 | Diploma of Electrotechnology | Accredited course |
VET Info Notes
engineering or associated trade course are required to complete 15 modules.
Students entering the Certificate IV directly other than trade entry or
equivalent are required to complete 23 modules.
Recognition of Prior Learning principles may be applied to provide credit for
knowledge and skills already possessed.
2 The NMEC Trade and Engineering Technician/Associate module banks are
not listed as part of this document. Reference should be made to the current
Module Reference Manuals or the complete module descriptors for further
information.
Both student and total hours are notional and are guidelines for provider
management purposes only.
Instructors and students should be encouraged to take advantage of the
acceleration facility afforded by competency-based training.
3 The course requires the selection of 15 full modules using the
following criteria:
-0 to 6 full modules from the National Metal and Engineering Curriculum (NMEC)
trade bank that are listed on this document (see note 4.1).
- 0 - 15 full EA modules from the Engineering
Technician/Associate bank, the dual status NMEC modules from the graphics,
electrical or electronic module bank.
4 Select between 0 and 23 full modules from:
- the NMEC trade bank (listed)
- the Engineering Technician/Associate bank (graphics,
electrical or electronic)
- the dual status NMEC modules (listed)
4.1 NMEC Trade Bank
A maximum of 6 full modules may be chosen from this module bank (see General
Note 1). Modules already completed as part of another course such as a
Certificate of Trade Studies course may not be selected. Refer to the current
NMEC Module Reference Manual for a complete listing of modules and information
on nominal duration and pre-requisites.
4.2 Engineering Technician/ Associate Bank
A maximum of 23 full modules may be selected from this module bank (see General
Note 1). Modules selected must be designated as EA. Refer to the current
Engineering Technician/Associate Module Reference Manual for a complete listing
of modules and information on nominal duration and pre-requisites.
4.3 Dual Status NMEC Modules
NMEC
Electrical/Electronic
86958 NE16 DIGITAL SUBSYSTEMS 1
86959 NE17 DIGITAL SUBSYSTEMS 2
86974 NE33 CIRCUIT DEVELOPMENT 2
86983 NE50 PROGRAMMABLE CONTROLLERS 2
86984 NE51 PROGRAMMABLECONTROLLERS 3
86989 NE72 OPERATIONAL AMPLIFIER APPLICATIONS
86990 NE73 MICROPROCESSOR PROGRAMMING 1
86991 NE74 MICROPROCESSOR PROGRAMMING 2
86992 NE75 THYRISTOR APPLICATIONS
86993 NE76 AC MOTOR CONTROL
86994 NE77 DC MOTOR CONTROL
87309 NE103 MICROPROCESSOR APPLICATIONS 1
87210 NE105 ADVANCED TEST EQUIPMENT
87253 NE107 ILLUMINATION 2
87009 NE122 INDUSTRIAL TRANSDUCERS
87023 NE123 INDUSTRIAL CONTROL
87024 NE124 LINEAR IC APPLICATIONS
87255 NE137 LARGER SCALE ELECTRICAL CONTRACTING 1
87256 NE138 LARGER SCALE ELECTRICAL CONTRACTING 2
86856 NE212 DISTRIBUTIVE CONTROL SYSTEMS (DCS)
In provider planning context:
- a full module represents 36 hours
- a half module represents 18 hours
- a one and a half module represents 54 hours
- a dual module represents 72 hours
No information