Accredited course Outline
Date retreived
22/07/2026 9:34 AM AWST
22/07/2026 9:34 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Unspecified Code Sheetmetal
Unspecified Code Sheetmetal
Accredited course
National Code:
State Code:
4790
4790
TGA Status:
Draft
Draft
DTWD Status:
Approved
Approved
State Implementation and Classification
Approved Date
Field of Education
030701 - Mechanical Engineering
AQF Level
Unspecified Code
Nominal Hours
932
Duration
Unspecified
Stream of Study
Partial Exemption to Recognised Trades Course (3211)
Accredited Date
Expiry Date
VET Act Classifier
C
VET Act Conditions
Description
To provide the student with technical training
equivalent to 1A, 1B and 2A of the TAFE segment of
the apprenticeship course in Sheetmetal.
To enhance skill development in all aspects of the
trade enabling the student to equal the level of
training of an industrial apprentice who has
completed one and a half years of an apprenticeship.
Schedule
1. CORE
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 63129 | Communication (Common Core) | 34 | Module | |
| 63133 | Communication (Trades) | 34 | Module | |
| 85132 | Sheetmetal App 1a | 144 | Module | |
| 85133 | Sheetmetal App 1b | 144 | Module | |
| 85134 | Sheetmetal App 2a | 144 | Module | |
| 98002 | Supplementary Practical Skills 1a | 68 | Module | |
| 98003 | Supplementary Practical Skills 1b | 68 | Module |
No information
VET Info Notes
1 The subjects 98002 and 98003 each have a duration of 216 hours in this
course.
2 REMEDIAL ACTION
The primary responsibility for initiating remedial
action necessary in the areas of technical
training related trade subjects and educational
subjects rests with the individual lecturer.
Individual students with substantial literacy and
numeracy difficulties may have the time spent on
any subject, other than technical training,
reduced by up to 72 hours (2 hours x 36 weeks) to
allow him/her to attend a suitable course of
study.
3 ACCREDITATION
On successful completion of the technical training
section of the course, the student shall be
credited with subjects 1A, 1B and 2A of the
Sheetmetal apprenticeship course.
4 SUPPLEMENTARY PRACTICAL SKILLS
Factory and on-site visits should be undertaken
when available and relevant. On-site and
on-campus real work to be undertaken when relevant
work available.
5 CERTIFICATE OF PRE-APPRENTICESHIP STUDIES
To be eligible for the Certificate of
Pre-Apprenticeship Studies the student must gain a
pass standard in each subject of the certificate.
6 NEW APPRENTICE TRAINING AND ASSESSMENT SCHEME (NATAS)
For an apprentice to be eligible for a
DEPARTMENT OF EMPLOYMENT AND TRAINING TRADE
CERTIFICATE, the apprentice must have achieved
the competencies as determined by the rules of the
appropriate Trade Training Schedule (TTS).
Achievement of College-listed competencies for
each apprentice, as listed in the TTS, is to be
recorded on the appropriate Trade Training
Schedule Assessment forms.
The Division of Industrial Training (DIT) will
require a completed College assessment report at
the conclusion of the apprentice's College
training. This report is to be forwarded to DIT prior to the close of
College business in the year of completion.
course.
2 REMEDIAL ACTION
The primary responsibility for initiating remedial
action necessary in the areas of technical
training related trade subjects and educational
subjects rests with the individual lecturer.
Individual students with substantial literacy and
numeracy difficulties may have the time spent on
any subject, other than technical training,
reduced by up to 72 hours (2 hours x 36 weeks) to
allow him/her to attend a suitable course of
study.
3 ACCREDITATION
On successful completion of the technical training
section of the course, the student shall be
credited with subjects 1A, 1B and 2A of the
Sheetmetal apprenticeship course.
4 SUPPLEMENTARY PRACTICAL SKILLS
Factory and on-site visits should be undertaken
when available and relevant. On-site and
on-campus real work to be undertaken when relevant
work available.
5 CERTIFICATE OF PRE-APPRENTICESHIP STUDIES
To be eligible for the Certificate of
Pre-Apprenticeship Studies the student must gain a
pass standard in each subject of the certificate.
6 NEW APPRENTICE TRAINING AND ASSESSMENT SCHEME (NATAS)
For an apprentice to be eligible for a
DEPARTMENT OF EMPLOYMENT AND TRAINING TRADE
CERTIFICATE, the apprentice must have achieved
the competencies as determined by the rules of the
appropriate Trade Training Schedule (TTS).
Achievement of College-listed competencies for
each apprentice, as listed in the TTS, is to be
recorded on the appropriate Trade Training
Schedule Assessment forms.
The Division of Industrial Training (DIT) will
require a completed College assessment report at
the conclusion of the apprentice's College
training. This report is to be forwarded to DIT prior to the close of
College business in the year of completion.
No information