Accredited course Outline
22/07/2026 4:45 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate II in Glass Processing
Certificate II in Glass Processing
51824
1439
Replaced
Replaced
State Implementation and Classification
Description
This course is designed to reflect the role of employees who will participate in a range of entry level Glass Processing focussed workplace tasks where they operate within defined areas of limited complexity and routine activities, with clear directions and mentoring to guide them.
Schedule
1.
CORE
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W0245 | LMFCR0003A | Carry out measurements and calculations | 20 | Unit of competency |
| W0231 | LMFCR0002A | Communicate in the workplace | 20 | Unit of competency |
| W0223 | LMFCR0001A | Follow safe working policies and practices | 40 | Unit of competency |
| W0251 | LMFCR0004A | Work effectively with others | 15 | Unit of competency |
2.
Mandatory Sector Specialist Units
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W0313 | LMFGG2002A | Apply first aid | 8 | Unit of competency |
| W0316 | LMFGG2005A | Move glass sheets by hand | 8 | Unit of competency |
| W0317 | LMFGG2006A | Move single glass sheets by mechanical means | 16 | Unit of competency |
| W0318 | LMFGG2007A | Process glass by basic machines | 48 | Unit of competency |
| W0326 | LMFGG3005A | Process glass by semi-automatic and automatic machines | 48 | Unit of competency |
| W0325 | LMFGG3004A | Process thick glass by hand | 61 | Unit of competency |
| W0315 | LMFGG2004A | Process thin glass by hand | 64 | Unit of competency |
| W0322 | LMFGG3001A | Store and handle glass | 20 | Unit of competency |
| W0312 | LMFGG2001A | Use glass and glazing sector hand and power tools | 44 | Unit of competency |
3.
Elective Sector Specialist Units.
Two (2) electives must be selected from the following list as identified by industry.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W0327 | LMFGG3006A | Apply film to glass | 48 | Unit of competency |
| W0329 | LMFGG3008A | Apply patterns and designs to glass | 32 | Unit of competency |
| W0328 | LMFGG3007A | Form glass | 40 | Unit of competency |
| W0324 | LMFGG3003A | Move block/bulk glass sheet by mechanical means | 16 | Unit of competency |
| W0314 | LMFGG2003A | Operate glass freefall rack and table | 8 | Unit of competency |
| W0330 | LMFGG3009A | Set up and operate glass laminating equipment | 60 | Unit of competency |
| W0331 | LMFGG3010A | Set up and operate glass toughening equipment | 60 | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| 1477 | 52262 | Certificate II in Glass Processing | Accredited course |
VET Info Notes
2. The proponent for this course is SwanTAFE, PO Box 1336, Midland 6936 on behalf of Light Manufacturing ITC. This course has been accredited by the Training Accreditation Council (TAC) in Western Australia. It has been placed on the National Register as code 51824.
3. Further information on this program may be obtained from METS CSSN Curriculum Officer, SwanTAFE Telephone (08) 9442 8301
4. This course was entered on to STARS by CSSN Swan TAFE on 25th September 2007
No information