Module Outline
Date retreived
22/07/2026 8:59 PM AWST
22/07/2026 8:59 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Apply Australian WHS practices in the workplace
Apply Australian WHS practices in the workplace
Module
National Code
ECGELE001A
ECGELE001A
State Code
AW870
AW870
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
08/02/2016
Field of Education
061301 - Occupational Health And Safety
Nominal Hours
9
Description
This unit is for holders of OTSR issued by an RTO and incorporated the minimum context gap to meet Australian standards and regulations.
No information
Evidence Guide
1. Prepare to enter a work area.
1.1 Work area Access Authorities (permits) are obtained from appropriate personnel according to established procedures.
1.2 Instruction in hazards and risk control measures for specific work functions and work areas are identified and obtained.
1.3 Preparations for electrical and non-electrical isolation are carried out to prevent creation of hazards from loss of machine/system/process control according to established
procedures.
1.4 Tools and equipment needed for the work are checked for safety and correct functionality according to established procedures and regulatory requirements.
2. Apply safe working practices.
2.1 Workplace procedures and work instructions for controlling risk are followed accurately.
2.2 Workplace procedures for dealing with accidents, fires and emergencies are followed according to work procedures and scope of responsibility and competencies.
3. Follow workplace procedures for hazard identification and risk control.
3.1 Hazards are identified and control measures implemented and monitored through active participation in the consultation process with mployer and other employees.
3.2 Hazards in the work area are recognised and reported to appropriate personnel according to established procedures.
3.3 WHS/OH&S records of incidents are completed in accordance with regulatory requirements and established procedures.
3.4 Workplace instructions and training are followed accurately within established procedures.
1.1 Work area Access Authorities (permits) are obtained from appropriate personnel according to established procedures.
1.2 Instruction in hazards and risk control measures for specific work functions and work areas are identified and obtained.
1.3 Preparations for electrical and non-electrical isolation are carried out to prevent creation of hazards from loss of machine/system/process control according to established
procedures.
1.4 Tools and equipment needed for the work are checked for safety and correct functionality according to established procedures and regulatory requirements.
2. Apply safe working practices.
2.1 Workplace procedures and work instructions for controlling risk are followed accurately.
2.2 Workplace procedures for dealing with accidents, fires and emergencies are followed according to work procedures and scope of responsibility and competencies.
3. Follow workplace procedures for hazard identification and risk control.
3.1 Hazards are identified and control measures implemented and monitored through active participation in the consultation process with mployer and other employees.
3.2 Hazards in the work area are recognised and reported to appropriate personnel according to established procedures.
3.3 WHS/OH&S records of incidents are completed in accordance with regulatory requirements and established procedures.
3.4 Workplace instructions and training are followed accurately within established procedures.
Elements and Performance Criteria
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| 75980 | EEOZAMCG01A | Apply Australian OHS practices in the workplace - AMCG | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AY777 | NAT10809001 | Apply Australian Work Health and Safety practices in the electrical workplace | Module |
Associated Qual/Courses
| State Code | National Code | Title | Type |
|---|---|---|---|
| YU04 | 10145NAT | Course in Electrician - Minimum Australian Context Gap | Accredited course |