Module Outline
Date retreived
22/07/2026 12:27 PM AWST
22/07/2026 12:27 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Fitting and Machining App 1a
Fitting and Machining App 1a
Module
National Code
State Code
85371
85371
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
Field of Education
Nominal Hours
144
Description
To provide workshop practice, and the related theory,
that will allow apprentices to develop basic skills on
the bench, drills and lathe.
To develop safe practices in the workshop.
that will allow apprentices to develop basic skills on
the bench, drills and lathe.
To develop safe practices in the workshop.
No information
Evidence Guide
Theory Examination 50%
Calculations 50%
Internal Practical Assessment 100%
Trade Theory - Written paper, one hour 50 marks
Trade Calculations - Written paper, one hour 50
marks
Practice - Practical tests, as specified in Stage Practical Workbook.
Trade Technology Mark = Trade Theory Mark + Trade
Calculations Mark
Practical Mark = The percentage of Practical
Objectives achieved.
Certificate of Trade Studies
The Certificate percentage for each semester stage,
shall be the Trade Technology Mark.
To be eligible for the Certificate of Trade Studies,
the apprentice must reach a pass standard in both the
Trade Technology Mark and the Practical Mark, for each
semester stage.
A Privileged Re-Examination may be granted
on the recommendation of a Board of Review, when the
practice assessment is satisfactory.
Calculations 50%
Internal Practical Assessment 100%
Trade Theory - Written paper, one hour 50 marks
Trade Calculations - Written paper, one hour 50
marks
Practice - Practical tests, as specified in Stage Practical Workbook.
Trade Technology Mark = Trade Theory Mark + Trade
Calculations Mark
Practical Mark = The percentage of Practical
Objectives achieved.
Certificate of Trade Studies
The Certificate percentage for each semester stage,
shall be the Trade Technology Mark.
To be eligible for the Certificate of Trade Studies,
the apprentice must reach a pass standard in both the
Trade Technology Mark and the Practical Mark, for each
semester stage.
A Privileged Re-Examination may be granted
on the recommendation of a Board of Review, when the
practice assessment is satisfactory.
Elements and Performance Criteria
No information
No information
Associated Qual/Courses
| State Code | National Code | Title | Type |
|---|---|---|---|
| 2800 | First Class Machining | Accredited course | |
| 3052 | Fitting and Machining | Accredited course | |
| 2840 | Fitting and Machining | Accredited course | |
| 2841 | Certificate III in Locksmithing | Accredited course | |
| 2912 | Mechanical Fitting | Accredited course | |
| 4831 | Certificate III in Metal Furniture | Accredited course | |
| 3076 | Plant Mechanic.fitting and Machining | Accredited course | |
| 3259 | Pre-vocational Studies and Metal Trades | Accredited course |