Pathway Outline

Date retreived
22/07/2026 9:42 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Instrumentation / Electrical Control

Instrumentation / Electrical Control

Pathway
National Code
—
State Code
WS49
DTWD Status
Replaced
Associated Qualification
Certificate II in Engineering - Production
National Code
MEM20198
State Code
M002
TGA Status
Deleted
DTWD Status
Archived
National Endorsed, State Implementation and Classification
Original TGA Release Date
21/10/1998
Field of Education
0307 - Mechanical And Industrial Engineering And Technology
Approved Date
12/11/1999
Stream of Study
Initial Vocational (3100 - 3600)
Duration
Unspecified
Current Release Version
1.00
Current Release Date
21/10/1998
Nominal Hours
609
Description
Packaging Rules
1.
Complete the foundation units and MEM2.1C12A (core unit), plus electives to make up a total of 32 points.
State Code National Code Title Hours Type
M0202 MEM1.2FA Apply principles of Occupational Health & Safety in work environment 1 Unit of competency
M0203 MEM1.3FA Apply quality procedures 1 Unit of competency
M0205 MEM2.1C12A Apply quality systems 18 Unit of competency
M0204 MEM1.4FA Plan to undertake a routine task 1 Unit of competency
M0201 MEM1.1FA Undertake interactive workplace communication 1 Unit of competency
2.
The Certificate II in Engineering requires the completion of 32 points. For WS49 the electives are mandatory but a Certificate II outcome can be achieved if the core and 30 points from the list below are completed. A statement of Attainment will be issued for the remaining units.
State Code National Code Title Hours Type
M0462 MEM18.55AA Dismantle, replace and assemble engineering components 27 Unit of competency
M0333 MEM9.1AA Draw and interpret sketch 18 Unit of competency
M0378 MEM12.2AA Electrical/electronic measurement 18 Unit of competency
M0347 MEM10.4AA Enter and change programmable controller operational parameters 18 Unit of competency
M0356 MEM11.2AA Erect/dismantle complex scaffolding and equipment 36 Unit of competency
M0334 MEM9.2AA Interpret technical drawing 36 Unit of competency
M1486 MEM18.64AA Maintain instrumentation system components 54 Unit of competency
M0246 MEM5.1AA Manual soldering/desoldering - electrical/electronic components 36 Unit of competency
M0209 MEM2.5C11A Measure with graduated devices 18 Unit of competency
M1348 MEM2.3C11B Operate in a work based team environment 18 Unit of competency
M0212 MEM2.8C10A Perform computations 18 Unit of competency
M0211 MEM2.7C10A Perform computations - basic 18 Unit of competency
M0213 MEM2.9C10A Perform computer operations 18 Unit of competency
M0384 MEM13.1AA Perform emergency first aid 9 Unit of competency
M0216 MEM2.13C5A Perform mathematical computations 36 Unit of competency
M0345 MEM10.2AA Terminate and connect electrical wiring 27 Unit of competency
M0411 MEM18.2AA Use power tools/hand held operations 18 Unit of competency
3.
Skills practice and Work placement units
State Code National Code Title Hours Type
Y0225 Supervised Skills Practice 1 (Mee) 40 Module
Y0226 Supervised Skills Practice 2 (Mee) 40 Module
Y0227 Supervised Skills Practice 3 (Mee) 40 Module
Y0230 Workplace Placement 1 (Mee) 40 Module
Y0231 Workplace Placement 2 (Mee) 40 Module
No information
Note
No information
No information
No information