Qualification Outline
22/07/2026 6:25 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate II in Engineering - Production
Certificate II in Engineering - Production
MEM20198
M002
Deleted
Archived
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 21/10/1998 | Current | Archived |
Description
Schedule
Pathways
| State Code | Title |
|---|---|
| MS06 | Welding |
| MT07 | Communication Technology |
| WS02 | Patio and Light Structures |
| WS49 | Instrumentation / Electrical Control |
| WS50 | Aluminium Window and Frames |
1. CORE
**FOUNDATION** To meet the requirements of the Training Package qualification, complete all Foundation and Core Band 1 Units - listed as Core Requirements PLUS select 30 POINTS in units drawn from Core Band 1 AND Specialisation Band A electives listed below. Total qualification points to equal 32 points. NEW STUDENTS enrolling in or after 2002 must select version B competencies or higher. Lower competency versions are for continuing students who previously commenced on the earlier course. RTOs may choose to use higher competency versions in existing programs.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0202 | MEM1.2FA | Apply principles of Occupational Health & Safety in work environment | 1 | Unit of competency |
| M0203 | MEM1.3FA | Apply quality procedures | 1 | Unit of competency |
| M0205 | MEM2.1C12A | Apply quality systems | 18 | Unit of competency |
| M0204 | MEM1.4FA | Plan to undertake a routine task | 1 | Unit of competency |
| M0201 | MEM1.1FA | Undertake interactive workplace communication | 1 | Unit of competency |
2. ELECTIVES
**CORE BAND 1** Units updated. NEW STUDENTS enrolling in or after 2002 must select version B competencies or higher where superceeding earlier lower alpha versions.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0208 | MEM2.4C11A | Assist in the provision of on the job training | 18 | Unit of competency |
| M0209 | MEM2.5C11A | Measure with graduated devices | 18 | Unit of competency |
| M1348 | MEM2.3C11B | Operate in a work based team environment | 18 | Unit of competency |
| M0207 | MEM2.3C11A | Operate in a work based team environment | 18 | Unit of competency |
| M0206 | MEM2.2C11A | Organise and analyse information | 18 | Unit of competency |
| M0212 | MEM2.8C10A | Perform computations | 18 | Unit of competency |
| M0211 | MEM2.7C10A | Perform computations - basic | 18 | Unit of competency |
| M0213 | MEM2.9C10A | Perform computer operations | 18 | Unit of competency |
| M0210 | MEM2.6C10A | Plan a complete activity | 36 | Unit of competency |
3. ELECTIVE
SPECIALISATION BAND A ASSEMBLY
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0223 | MEM3.4AA | Electronic/electrical assembly (production) | 72 | Unit of competency |
| M0220 | MEM3.1AA | Manual production assembly | 36 | Unit of competency |
| M0221 | MEM3.2AA | Precision assembly | 36 | Unit of competency |
| M0224 | MEM3.5AA | Rework and repair (electrical/electronic production) | 72 | Unit of competency |
| M0225 | MEM3.6AA | Setting assembly stations | 18 | Unit of competency |
| M0226 | MEM3.7AA | Setting multistage continuous process lines | 54 | Unit of competency |
| M0222 | MEM3.3AA | Sheet and plate assembly | 36 | Unit of competency |
4. ELECTIVE
CASTING AND MOUDLING * Units updated. NEW STUDENTS enrolling in or after 2004 must select version B competencies or higher where superceeding earlier lower alpha versions.MEM4.9AB added November 2003
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0234 | MEM4.8AA | Fettle and trim metal castings/forgings | 36 | Unit of competency |
| M0244 | MEM4.18AA | General woodworking machine operations | 36 | Unit of competency |
| M0228 | MEM4.2AA | Gravity die casting | 18 | Unit of competency |
| W0817 | MEM4.9AB | Inspect/test castings/forgings | 54 | Unit of competency |
| M0235 | MEM4.9AA | Inspect/test castings/forgings | 54 | Unit of competency |
| M0227 | MEM4.1AA | Operate melting furnaces | 36 | Unit of competency |
| M0229 | MEM4.3AA | Operate pressure die casting machine | 36 | Unit of competency |
| M0232 | MEM4.6AA | Operate sand moulding and core making machines | 72 | Unit of competency |
| M0233 | MEM4.7AA | Pour molten metal | 36 | Unit of competency |
| M0230 | MEM4.4AA | Prepare and mix sand for metal moulding | 36 | Unit of competency |
| M0231 | MEM4.5AA | Produce moulds and cores by hand (jobbing) | 144 | Unit of competency |
| M0245 | MEM4.19AA | Refractory installation and repair | 36 | Unit of competency |
5. ELECTIVE
FABRICATION * Units updated. NEW STUDENTS enrolling in or after 2002 must select version B competencies or higher where superceeding earlier lower alpha versions. MEM5.11AB, MEM5.14AB, MEM5.49AB added November 2003
6. ELECTIVE
FORGING * Units updated. NEW STUDENTS enrolling in or after 2004 must select version B competencies or higher where superceeding earlier lower alpha versions. MEM6.3AB, MEM6.6AB added November 2003
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W0823 | MEM6.3AB | Carry out heat treatment | 54 | Unit of competency |
| M0280 | MEM6.3AA | Carry out heat treatment | 54 | Unit of competency |
| M0282 | MEM6.5AA | Drop and upset forging | 36 | Unit of competency |
| M0279 | MEM6.2AA | Hammer forging | 36 | Unit of competency |
| M0278 | MEM6.1AA | Hand forging | 36 | Unit of competency |
| M0284 | MEM6.7AA | Perform basic incidental heat/quenching, tempering and annealing | 18 | Unit of competency |
| M0281 | MEM6.4AA | Select heat treatment processes and test finished product | 54 | Unit of competency |
| M0283 | MEM6.6AA | Spring repair | 36 | Unit of competency |
| W0824 | MEM6.6AB | Spring repair | 36 | Unit of competency |
7. ELECTIVE
MACHINE AND PROCESS OPERATIONS * Units updated. NEW STUDENTS enrolling in or after 2002 must select version B competencies or higher where superceeding earlier lower alpha versions. MEM7.16AB, MEM7.18AB, MEM7.19AB, MEM7.20AB, MEM7.22AB, MEM7.23BB, MEM7.30AB, MEM7.31AB added November 2003
8. ELECTIVE
SUFRACE FINISHING * Units updated. NEW STUDENTS enrolling in or after 2004 must select version B competencies or higher where superceeding earlier lower alpha versions. MEM8.2AB, MEM8.3AB, MEM8.9AB, MEM8.18AA, MEM8.19AA, MEM8.20AA added November 2003.
9. ELECTIVE
DRAWING, DRAFTING AND DESIGN * Units updated.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0343 | MEM9.11AA | Apply basic engineering design concepts | 54 | Unit of competency |
| M0337 | MEM9.5AA | Basic Engineering detail drafting | 72 | Unit of competency |
| M1773 | MEM9.9BB | Create 2D drawings using computer aided design system | 72 | Unit of competency |
| M1774 | MEM9.10BB | Create 3D models using computer aided design system | 36 | Unit of competency |
| M0333 | MEM9.1AA | Draw and interpret sketch | 18 | Unit of competency |
| M0334 | MEM9.2AA | Interpret technical drawing | 36 | Unit of competency |
| M0335 | MEM9.3AA | Prepare basic engineering drawing | 72 | Unit of competency |
10. ELECTIVE
INSTALLATION & COMMISSIONING * Units updated. NEW STUDENTS enrolling in or after 2004 must select version B competencies or higher where superceeding earlier lower alpha versions. MEM10.1AB added November 2003
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M1778 | MEM10.13AA | Assemble and install equipment and accessories/ancillaries | 18 | Unit of competency |
| M0348 | MEM10.5AA | Commission programmable controller programs | 36 | Unit of competency |
| M0344 | MEM10.1AA | Erect structures | 36 | Unit of competency |
| W0839 | MEM10.1AB | Erect structures | 36 | Unit of competency |
| M0353 | MEM10.10AA | Install pipework and pipework assemblies | 36 | Unit of competency |
| M0352 | MEM10.9AA | Install refrigeration and air conditioning plant and equipment | 36 | Unit of competency |
| M0345 | MEM10.2AA | Terminate and connect electrical wiring | 27 | Unit of competency |
| M0354 | MEM10.11AA | Terminate and connect specialist cables | 18 | Unit of competency |
11. ELECTIVE
MATERIALS AND HANDLING * Units updated. NEW STUDENTS enrolling in or after 2002 must select version B competencies or higher where superceeding earlier lower alpha versions.
12. ELECTIVE
MEASUREMENT *Units updated.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0378 | MEM12.2AA | Electrical/electronic measurement | 18 | Unit of competency |
| M1779 | MEM12.19AA | Measure components using coordinate measuring machine | 36 | Unit of competency |
| M1781 | MEM12.21AA | Program coordinate measuring machine | 36 | Unit of competency |
| M1782 | MEM12.22AA | Program coordinate measuring machine (advanced) | 18 | Unit of competency |
| M1780 | MEM12.20AA | Set and operate coordinate measuring machine | 18 | Unit of competency |
| M0377 | MEM12.1AA | Use comparison and basic measuring devices | 18 | Unit of competency |
13. ELECTIVE
OCCUPATIONAL HEALTH & SAFETY *Units updated.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0390 | MEM13.7AA | Maintain water cooling towers and treatment systems | 18 | Unit of competency |
| M0389 | MEM13.6AA | Monitor Occupational Health & Safety factors for enterprise or section of enterprise | 36 | Unit of competency |
| M0384 | MEM13.1AA | Perform emergency first aid | 9 | Unit of competency |
| M0385 | MEM13.2AA | Undertake Occupational Health & Safety activities in the workplace | 27 | Unit of competency |
| M0386 | MEM13.3AA | Work safely with industrial chemicals and materials | 18 | Unit of competency |
| M1483 | MEM13.13AA | Work safely with ionizing radiation | 36 | Unit of competency |
| M0387 | MEM13.4AA | Work safely with molten metals/glass | 18 | Unit of competency |
14. ELECTIVE
QUALITY * Units updated. NEW STUDENTS enrolling in or after 2004 must select version B competencies or higher where superceeding earlier lower alpha versions. MEM15.20BB, MEM15.21BB added November 2003
15. ELECTIVE
COMMUNICATION * Units updated. NEW STUDENTS enrolling in or after 2002 must select version B competencies or higher where superceeding earlier lower alpha versions.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M1792 | MEM16.2AB | Participate in formal interviews and negotiations | 36 | Unit of competency |
| M0405 | MEM16.2AA | Participate in formal interviews and/or negotiations | 36 | Unit of competency |
| M0407 | MEM16.4AA | Perform internal/external customer service | 18 | Unit of competency |
16. ELECTIVE
TRAINING
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0408 | MEM17.1AA | Assist in development and deliver training in the workplace | 18 | Unit of competency |
| M0409 | MEM17.2AA | Conduct workplace assessment | 18 | Unit of competency |
17. ELECTIVE
MAINTENANCE & DIAGNOSTICS * Units updated. NEW STUDENTS enrolling in or after 2002 must select version B competencies or higher where superceeding earlier lower alpha versions. MEM18.28AB, MEM18.58AB added November 2003
18.
JEWELLERY * Units updated. MEM19.16AA TO MEM19.22AA added November 2003
19.
NON-DESTRUCTIVE TESTING
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M1496 | MEM24.12AA | Apply metallurgy principles | 36 | Unit of competency |
| M1489 | MEM24.3AA | Perform basic magnetic particle testing | 18 | Unit of competency |
| M1487 | MEM24.1AA | Perform basic penetrant testing | 18 | Unit of competency |
| M1493 | MEM24.9AA | Perform basic radiographic testing | 18 | Unit of competency |
| M1718 | MEM24.4AA | Perform magnetic particle testing | 36 | Unit of competency |
| M1488 | MEM24.2AA | Perform penetrant testing | 36 | Unit of competency |
| M1494 | MEM24.10AA | Perform radiographic testing | 54 | Unit of competency |
| M1492 | MEM24.8AA | Perform ultrasonic testing | 54 | Unit of competency |
| M1491 | MEM24.7AA | Perform ultrasonic thickness testing | 18 | Unit of competency |
20. ELECTIVE
SIMULATED WORKPLACE Learners undertaking this qualification under appropriately funded institutional delivery that requires simulated work placement have access to additional modules. These modules are designed to provide both simulated on-the-job practice and opportunities for demonstration of competence in a work environment.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 87527 | M & E Project Based Skills Development | 108 | Module | |
| 86882 | Modular Skills Practice 1 | 108 | Module |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| 3426 | Certificate I in Aluminium Shipbuilding (Composites Stream) Traineeship | Accredited course | |
| 6400 | 0605 | Engineering Production 1 | Accredited course |
| 3311 | 14856WA | Certificate II in Metals and Engineering Assistant (Vehicle Body Building) | Accredited course |
| 3260 | 2142 | Prevocational Studies Metals and Engineering | Accredited course |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| W233 | MEM20105 | Certificate II in Engineering | Qualification |
VET Info Notes
This training program is a representation of the qualification MEM20198 taken from the Metals and Engineering Training Package MEM98 which should be consulted for full descriptions of requirements. MEM98 is accredited until
23/10/2001.
1. This qualification is the copyright of The Australian National Training Authority.
2. Further information on this qualification is contained in the Training Package available from Australian
Training Products Ltd., Tel: (03) 9630 9836.
3. This qualification was entered on to the CMS by the Midland College of TAFE.
4. Simulated workplace practice style modules are designed to assist the learner to reach
competence in this qualification. They are not available to learners under Training Agreements.
5. This qualification was amended with the addition of 2 CSUs to the Fabrication pool of competencies by METS CSSN(Midland Campus) on 14/04/03.
6. Two pathways were added: WS02 and WS50 to provide Traineeship program outlines as requested by Swan Tafe on 15/10/2004. Amendments to M002 has been carried out by VET TL on 20/10/2004 on behalf of METS CSSN.
Entry Requirements
No information
Traineeships and Apprenticeships