Pathway Outline
Date retreived
22/07/2026 11:21 AM AWST
22/07/2026 11:21 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
School Apprenticeship Link - Metals and Engineering
School Apprenticeship Link - Metals and Engineering
Pathway
National Code
—
—
State Code
WS70
WS70
DTWD Status
Replaced
Replaced
National Endorsed, State Implementation and Classification
Original TGA Release Date
21/10/1998
21/10/1998
Field of Education
0307 - Mechanical And Industrial Engineering And Technology
0307 - Mechanical And Industrial Engineering And Technology
Approved Date
12/11/1999
12/11/1999
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
Unspecified
Current Release Version
1.00
1.00
Current Release Date
21/10/1998
21/10/1998
Nominal Hours
388
388
Description
Packaging Rules
1.
* NOTE: WS70 has been replaced by WT08. As of 01/01/2006, students enrolling in Phase 1 SAL Metals and Engineering must enrol in WT08.
Learners to complete the mandatory units listed below:
Learners to complete the mandatory units listed below:
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0202 | MEM1.2FA | Apply principles of Occupational Health & Safety in work environment | 1 | Unit of competency |
| M0203 | MEM1.3FA | Apply quality procedures | 1 | Unit of competency |
| M0333 | MEM9.1AA | Draw and interpret sketch | 18 | Unit of competency |
| M0209 | MEM2.5C11A | Measure with graduated devices | 18 | Unit of competency |
| M0212 | MEM2.8C10A | Perform computations | 18 | Unit of competency |
| M0211 | MEM2.7C10A | Perform computations - basic | 18 | Unit of competency |
| M0384 | MEM13.1AA | Perform emergency first aid | 9 | Unit of competency |
| M0204 | MEM1.4FA | Plan to undertake a routine task | 1 | Unit of competency |
| M0201 | MEM1.1FA | Undertake interactive workplace communication | 1 | Unit of competency |
| M1356 | MEM18.1AB | Use hand tools | 18 | Unit of competency |
| M0411 | MEM18.2AA | Use power tools/hand held operations | 18 | Unit of competency |
| M0315 | MEM7.32AA | Use workshop machines for basic operations | 18 | Unit of competency |
2.
Supervised skill practice to a total of 120 hours. Note if electrical (Mee) is selected then choose one of the mechanical (Mmf or Mmp)
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| Y0225 | Supervised Skills Practice 1 (Mee) | 40 | Module | |
| Y0145 | Supervised Skills Practice 1 (Mfb) | 40 | Module | |
| Y0205 | Supervised Skills Practice 1 (Mmf) | 40 | Module | |
| Y0195 | Supervised Skills Practice 1 (Mmp) | 40 | Module |
3.
Structured work placement to a total of 120 hours
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| Y0150 | Workplace Placement 1 (Mfb) | 40 | Module | |
| Y0210 | Workplace Placement 1 (Mmf) | 40 | Module | |
| Y0200 | Workplace Placement 1 (Mmp) | 40 | Module |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WT28 | School Apprenticeship Link -Metals and Engineering | Pathway |
Note
No information
No information