Pathway Outline
Date retreived
22/07/2026 1:22 PM AWST
22/07/2026 1:22 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
SAL Kickstart Pre-Apprenticeship - Vehicle Servicing, Light
SAL Kickstart Pre-Apprenticeship - Vehicle Servicing, Light
Pathway
National Code
—
—
State Code
WB02
WB02
DTWD Status
Replaced
Replaced
National Endorsed, State Implementation and Classification
Original TGA Release Date
20/12/2011
20/12/2011
Field of Education
0305 - Automotive Engineering And Technology
0305 - Automotive Engineering And Technology
Approved Date
16/01/2006
16/01/2006
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
3 Semesters
Current Release Version
2.00
2.00
Current Release Date
20/12/2011
20/12/2011
Nominal Hours
600
600
Description
NOTE: No new enrolments in this program as of 10 October 2011. Please enrol in the replacement program as indicated in the Replaces/Replaced section.
This training program leads to the completion of the Certificate II level SAL Pre-Apprenticeship Vehicle Servicing, Light Pathway WB02 and the AUR05 Automotive Industry Retail, Service and Repair Training Package qualification AUR20505.
This training program leads to the completion of the Certificate II level SAL Pre-Apprenticeship Vehicle Servicing, Light Pathway WB02 and the AUR05 Automotive Industry Retail, Service and Repair Training Package qualification AUR20505.
Packaging Rules
1. CORE UNITS
Complete ALL units.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W2828 | AURC270103A | Apply safe working practices | 20 | Unit of competency |
| W5026 | AURT271781A | Implement and monitor environmental regulations in the automotive mechanical industry | 20 | Unit of competency |
2. TECHNICAL INVENTORY UNITS - COMPULSORY UNITS
Complete the units below.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W2994 | AURT210170A | Inspect and service braking systems | 20 | Unit of competency |
| W2982 | AURT202170A | Inspect and service cooling systems | 20 | Unit of competency |
| W2980 | AURT201170A | Inspect and service engines | 20 | Unit of competency |
| W5003 | AURT215170A | Inspect and service steering systems | 20 | Unit of competency |
| W5005 | AURT216170A | Inspect and service suspension systems | 20 | Unit of competency |
| W2990 | AURT207170A | Inspect and service transmissions (automatic) | 20 | Unit of competency |
| W2989 | AURT206670A | Inspect and service transmissions (manual) | 20 | Unit of competency |
| W5001 | AURT213170A | Service final drive (driveline) | 16 | Unit of competency |
| W2998 | AURT212670A | Service final drive assemblies | 20 | Unit of competency |
| W9819 | AURT203170B | Service petrol fuel systems | 20 | Unit of competency |
3. TECHNICAL INVENTORY UNITS
Select a further 5 (five) units from the Technical Inventory. The following is one example of units that may be selected. The AUR05 Automotive Industry Retail, Service and Repair Training Package should be consulted for further information on the selection of units.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W2825 | AURC252103A | Apply basic automotive troubleshooting processes | 24 | Unit of competency |
| W2831 | AURC270789A | Communicate effectively in the workplace | 20 | Unit of competency |
| W2981 | AURT202166A | Repair cooling systems | 20 | Unit of competency |
| W2873 | AURE320666A | Repair ignition systems | 30 | Unit of competency |
| W2978 | AURT200368A | Select and use bearings, seals, gaskets, sealants and adhesives | 20 | Unit of competency |
4. ELECTIVE UNITS
Complete 3 (three) elective units. The following is one example of units that may be selected. The AUR05 Automotive Industry Retail, Service and Repair Training Package should be consulted for further information on the selection of elective units. Total hours for the training program should not exceed 600.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W2797 | AURA254180A | Operate information technology systems | 20 | Unit of competency |
| W2999 | AURT213165A | Remove and refit driveline components | 12 | Unit of competency |
| W2988 | AURT205166A | Repair exhaust system components | 20 | Unit of competency |
5. WORK PLACEMENT MODULES
Complete the following modules.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 81541 | SAL Work Placement 1 | 50 | Module | |
| 81542 | SAL Work Placement 2 | 50 | Module | |
| 81543 | SAL Work Placement 3 | 50 | Module | |
| 81544 | SAL Work Placement 4 | 50 | Module |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WA32 | Pre-Apprenticeship (Vehicle Servicing - Light) | Pathway |
Note
This training program has been created as a pathway of the Training Package qualification AUR20505 Certificate II in Automotive Vehicle Servicing on 11 August 2010.
Students enrolling in this pathway must be attending a secondary education institution, be enrolled as a Year 11 or Year 12 student and have academic achievement of satisfactory completion of Year 10.
The School Apprenticeship Link (SAL) Kickstart program is a pilot program. Students must be selected to participate in the program
This qualification is the copyright of DEEWR.
Further information on this training program may be obtained from the Curriculum Development and Research Branch of the Department of Workplace Training and Development, Tel: 08 9229 5464.
** No new enrolments in this program as of 10 October 2011. Please enrol in the replacement program as indicated in the Replaces/Replaced section. **
Students enrolling in this pathway must be attending a secondary education institution, be enrolled as a Year 11 or Year 12 student and have academic achievement of satisfactory completion of Year 10.
The School Apprenticeship Link (SAL) Kickstart program is a pilot program. Students must be selected to participate in the program
This qualification is the copyright of DEEWR.
Further information on this training program may be obtained from the Curriculum Development and Research Branch of the Department of Workplace Training and Development, Tel: 08 9229 5464.
** No new enrolments in this program as of 10 October 2011. Please enrol in the replacement program as indicated in the Replaces/Replaced section. **
Entry Requirements
Not Applicable
