Pathway Outline
Date retreived
22/07/2026 2:53 PM AWST
22/07/2026 2:53 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
SAL Family of Trades - Metals
SAL Family of Trades - Metals
Pathway
National Code
—
—
State Code
WB25
WB25
DTWD Status
Approved
Approved
National Endorsed, State Implementation and Classification
Original TGA Release Date
27/09/2011
27/09/2011
Field of Education
0307 - Mechanical And Industrial Engineering And Technology
0307 - Mechanical And Industrial Engineering And Technology
Approved Date
19/09/2006
19/09/2006
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
2 Semesters
Current Release Version
2.00
2.00
Current Release Date
27/09/2011
27/09/2011
Nominal Hours
435
435
Description
This training program has been developed specifically for the use in the School Apprenticeship Link (SAL) Family of Trades Metals. This training program leads to the completion of the SAL Family of Trades - Metals Pathway WB25 and the MEM05 Metals and Engineering Training Package qualification MEM10105.
Packaging Rules
1. CORE UNITS
Complete ALL core units.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W5502 | MEM13014A | Apply principles of occupational health and safety in the work environment | 4 | Unit of competency |
| W5531 | MEM15024A | Apply quality procedures | 4 | Unit of competency |
| W5512 | MEM14004A | Plan to undertake a routine task | 4 | Unit of competency |
| W5548 | MEM16007A | Work with others in a manufacturing, engineering or related environment | 4 | Unit of competency |
2. ELECTIVE UNITS - FABRICATION, FITTING/MACHINING
Complete the following elective units.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W5449 | MEM12024A | Perform computations | 27 | Unit of competency |
| W5492 | MEM12023A | Perform engineering measurements | 48 | Unit of competency |
| W5333 | MEM05007C | Perform manual heating and thermal cutting | 18 | Unit of competency |
| W5364 | MEM07001B | Perform operational maintenance of machines/equipment | 18 | Unit of competency |
| W5294 | MEM05012C | Perform routine manual metal arc welding | 18 | Unit of competency |
| W5325 | MEM05004C | Perform routine oxy acetylene welding | 18 | Unit of competency |
| W5466 | MEM11011B | Undertake manual handling | 18 | Unit of competency |
| W5563 | MEM18001C | Use hand tools | 18 | Unit of competency |
| W5574 | MEM18002B | Use power tools/hand held operations | 18 | Unit of competency |
| W5378 | MEM07032B | Use workshop machines for basic operations | 18 | Unit of competency |
3. WORL PLACEMENT/WORK BASED PROJECT MODULES
Complete the following modules.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 82036 | Work Based Project (1) | 40 | Module | |
| 82037 | Work Based Project (2) | 40 | Module | |
| Y0281 | Work Placement 1 | 40 | Module | |
| Y0282 | Work Placement 2 | 40 | Module | |
| Y0283 | Work Placement 3 | 40 | Module |
No information
Note
This training program has been created as a pathway of the Training Package qualification MEM10105 Certificate I in Engineering qualification on 20 August 2010.
This qualification is the copyright of DEEWR.
Further information on this training program may be obtained from the Curriculum Development and Research Branch of the Department of Workplace Training and Development, Tel: 08 9229 5464.
This qualification is the copyright of DEEWR.
Further information on this training program may be obtained from the Curriculum Development and Research Branch of the Department of Workplace Training and Development, Tel: 08 9229 5464.
Entry Requirements
Not Applicable