Unit of competency Outline

Date retreived
22/07/2026 2:08 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Work with others in a manufacturing, engineering or related environment

Work with others in a manufacturing, engineering or related environment

Unit of competency
National Code
MEM16007A
State Code
W5548
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
01/12/2005
State Implementation and Classification
Approved Date
27/08/2014
Field of Education
120505 - Work Practices Programmes
Original Release Date
27/08/2014
Nominal Hours
4
Description
This unit covers operating in an interactive work environment.It covers contribution to a group effort in order to plan and carry out work. This includes identification of work roles, communication and cooperation with others.
Notes
Elements and Performance Criteria
1. Identify roles and responsibilities
  • 1.1. Own role and responsibilities are identified.
  • 1.2. Relationships within immediate group and with employees performing related/interdependent activities are identified.
2. Plan activities
  • 2.1. Common goals, objectives and task requirements are identified and clarified with appropriate persons.
  • 2.2. Individual tasks are determined and agreed on according to workplace procedures.
3. Work with others
  • 3.1. Effective interpersonal skills are applied to interact with others and to contribute to activities and objectives.
  • 3.2. Assigned or agreed tasks are performed in accordance with agreed requirements, specifications and workplace procedures.
  • 3.3. Work progress is reviewed and modified as agreed to complement the work of others.
  • 3.4. Agreed reporting lines are followed using standard operating procedures.
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Effective interpersonal skills
Basic listening and speaking skills, use of terminology and jargon, giving and receiving feedback, interpreting instructions, verbal and non-verbal modes and methods of communication, communication breakdowns and barriers, basic principles of effective communication
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to operate in a work-based team environment.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.
Context of and specific resources for assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.
This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with operating in a work-based team environment or other units requiring the exercise of the skills and knowledge covered by this unit.
Method of assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.
Guidance information for assessment
Replaced By
State Code National Code Title Type
OAV23 MEM13015 Work safely and effectively in manufacturing and engineering Unit of competency
State Code National Code Title Type
D699 MEM40311 Certificate IV in Advanced Jewellery Manufacture Qualification
BGO44 52845WA Certificate II in Autonomous Workplace Operations Accredited course
W246 MEM40205 Certificate IV in Boating Services Qualification
W244 MEM30905 Certificate III in Boating Services Qualification
W232 MEM10205 Certificate I in Boating Services Qualification
W235 MEM20305 Certificate II in Boating Services Qualification
W231 MEM10105 Certificate I in Engineering Qualification
W245 MEM40105 Certificate IV in Engineering Qualification
W233 MEM20105 Certificate II in Engineering Qualification
W247 MEM50105 Diploma of Engineering - Advanced Trade Qualification
W992 MEM31112 Certificate III in Engineering - Composites Trade Qualification
W239 MEM30405 Certificate III in Engineering - Electrical/Electronic Trade Qualification
W238 MEM30305 Certificate III in Engineering - Fabrication Trade Qualification
AWG6 MEM31215 Certificate III in Engineering - Industrial Electrician Qualification
W237 MEM30205 Certificate III in Engineering - Mechanical Trade Qualification
W236 MEM30105 Certificate III in Engineering - Production Systems Qualification
W234 MEM20205 Certificate II in Engineering - Production Technology Qualification
W726 LMT31909 Certificate III in Engineering - TCF Mechanic Qualification
W644 LMF50508 Diploma of Furniture Design and Technology Qualification
J742 MSF40213 Certificate IV in Furniture Design and Technology Qualification
J731 MSF50313 Diploma of Furniture Design and Technology Qualification
W642 LMF40508 Certificate IV in Furniture Design and Technology Qualification
1531 52299 Certificate II in Jewellery Manufacture Accredited course
W241 MEM30605 Certificate III in Jewellery Manufacture Qualification
W243 MEM30805 Certificate III in Locksmithing Qualification
W526 MSA50108 Diploma of Manufacturing Technology Qualification
W242 MEM30705 Certificate III in Marine Craft Construction Qualification
BCT7 PMB20116 Certificate II in Polymer Processing Qualification
W399 PMB20107 Certificate II in Polymer Processing Qualification
W400 PMB30107 Certificate III in Polymer Processing Qualification
BCT3 PMB30116 Certificate III in Polymer Processing Qualification
W402 PMB50107 Diploma of Polymer Technology Qualification
W403 PMB60107 Advanced Diploma of Polymer Technology Qualification
BCU8 PMB60116 Advanced Diploma of Polymer Technology Qualification
BCU0 PMB40116 Certificate IV in Polymer Technology Qualification
BCT8 PMB50116 Diploma of Polymer Technology Qualification
W401 PMB40107 Certificate IV in Polymer Technology Qualification
W485 MSA20107 Certificate II in Process Manufacturing Qualification
BAN8 MSM30116 Certificate III in Process Manufacturing Qualification
D688 MSA40311 Certificate IV in Process Manufacturing Qualification
BAN6 MSM20116 Certificate II in Process Manufacturing Qualification
W486 MSA30107 Certificate III in Process Manufacturing Qualification
BAM7 MSM40116 Certificate IV in Process Manufacturing Qualification
BAN7 MSM30216 Certificate III in Surface Preparation and Coating Application Qualification
S668 MSA30309 Certificate III in Surface Preparation and Coating Application Qualification
W946 MEM31010 Certificate III in Watch and Clock Service and Repair Qualification