Qualification Outline
22/07/2026 10:41 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate III in Engineering - Fabrication Trade
Certificate III in Engineering - Fabrication Trade
MEM30305
W238
Replaced
Replaced
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 4.00 | 16/03/2012 | Current | Transition (Replaced) |
Description
This qualification covers the skills and knowledge required for employment as an Engineering Tradesperson - Fabrication within the metal, engineering, manufacturing and associated industries or other industries where Engineering Tradespersons - Fabrication work. The qualification has been specifically developed to meet the needs of apprentices in the above trade. The qualification packaging has been developed on an assumption that competency will be developed through an integrated combination of on and off-the-job learning strategies such as those delivered through a formal apprenticeship. The qualification may also be achieved through formal skills recognition assessment processes.
Job roles/employment outcomes
The Certificate III in Engineering - Fabrication Trade specifies the competencies required for employment as an Engineering Tradesperson - Fabrication including metal fabrication, forging, founding, structural steel erection, electroplating, metal spinning, metal polishing, sheet metal work, welding and the use of related computer controlled equipment.
Employment outcomes related to this qualification are found in a wide variety of manufacturing and engineering related sectors as well as Engineering Tradesperson - Fabrication roles in other industries.
Application
This qualification is designed to provide an industry recognised skills profile related to trade work as an Engineering Tradesperson - Fabrication. Skills development would usually be undertaken through an Australian Apprenticeship arrangement where the mix of on and off-the-job training would be specified in the Training Plan associated with the Contract of Training between the employer and apprentice.
Assessment of some units of competency must, where indicated, include evidence of the candidate's performance in a productive work environment where there is a sufficient range of appropriate tasks and materials to cover the scope of application of those units. All outcomes must reflect the standard of performance inherent in the job.
Occupational titles that this qualification is suitable for may vary and include metal fabrication tradesperson, boilermaker, 1st class sheet metal worker, 1st class welder, moulder, foundry tradesperson and patternmaker.
Schedule
Packaging Rules
The minimum requirements for achievement of the Certificate III in Engineering - FabricationTrade Marine are:
- completion of all twelve (12) core units of competency, and
- completion of Group A Fabrication stream units to the value of at least 40 points, and
- completion of units from Group B Certificate III Trade specialisation units listed in Appendix 1, Volume 1 of the Training Package, to bring the total value to at least 73 points
Points associated with prerequisites count towards the total (refer to units and prerequisites
listing in Appendix 2, Volume 1).
Appropriate Group B elective units to the value of 16 points may be chosen from other endorsed Training Packages and accredited courses where those units are available for inclusion at Certificate III. Note that the elective units listed below include all of the units that are approved for selection from the MEM Training Package for use in this qualification. This meets the NQC requirement that one sixth of the total units must be able to be selected from other qualifications in the same Training Package.
Registered Training Organisations must seek a determination from Manufacturing Skills Australia in respect of the allocation of points values for units of competency drawn from other Training Packages or accredited courses.
Only select units that would be suitable for Fabrication Trade occupational outcomes.
Pathways
| State Code | Title |
|---|---|
| AB53 | Marine |
| AC00 | Electroplating |
| WA86 | Surface Finishing |
| WT75 | Casting and Moulding |
| WT76 | Heavy |
| WT77 | Heavy/Welding |
| WT78 | Light |
| WT81 | Patternmaking |
| WT91 | First Class Welder |
1. Core Units
All twelve (12) units must be completed.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W5502 | MEM13014A | Apply principles of occupational health and safety in the work environment | 4 | Unit of competency |
| W5531 | MEM15024A | Apply quality procedures | 4 | Unit of competency |
| W5532 | MEM15002A | Apply quality systems | 16 | Unit of competency |
| W5552 | MEM17003A | Assist in the provision of on the job training | 18 | Unit of competency |
| W5452 | MEM16008A | Interact with computing technology | 18 | Unit of competency |
| W5451 | MEM16006A | Organise and communicate information | 18 | Unit of competency |
| D3655 | MSAENV272B | Participate in environmentally sustainable work practices | 20 | Unit of competency |
| W5449 | MEM12024A | Perform computations | 27 | Unit of competency |
| W5492 | MEM12023A | Perform engineering measurements | 48 | Unit of competency |
| W5513 | MEM14005A | Plan a complete activity | 32 | Unit of competency |
| W5512 | MEM14004A | Plan to undertake a routine task | 4 | Unit of competency |
| W5548 | MEM16007A | Work with others in a manufacturing, engineering or related environment | 4 | Unit of competency |
2. Group A Fabrication Trade Stream Units
Select units from this list to the value of at least 40 points from Group B.
Please refer to the Training Package for the full list of unit weighting points.
3. Group B Trade Specialisation Units
Select units to bring the total value to at least 73 points from Group B.
Please refer to Appendix 1, Volume 1 of the Training Package for the full list units and their weighting points.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| M006 | MEM30398 | Certificate III in Engineering - Fabrication Trade | Qualification |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| BEL2 | MEM31719 | Certificate III in Engineering - Casting and Moulding Trade | Qualification |
| BEK8 | MEM30319 | Certificate III in Engineering - Fabrication Trade | Qualification |
No information
Entry Requirements
Not Applicable
Traineeships and Apprenticeships
Part-time is defined as a minimum of 20 hours per week.
Part-time is defined as a minimum of 20 hours per week.
For elite athletes the minimum hours of employment are 7.5 hours per week, which can be averaged over six month periods.
Part-time is defined as a minimum of 20 hours per week.
For elite athletes the minimum hours of employment are 7.5 hours per week, which can be averaged over six month periods.
Part-time is defined as a minimum of 20 hours per week.
For elite athletes the minimum hours of employment are 7.5 hours per week, which can be averaged over six month periods.
Part-time is defined as a minimum of 20 hours per week.
For elite athletes the minimum hours of employment are 7.5 hours per week, which can be averaged over six month periods.
Part-time is defined as a minimum of 20 hours per week.
For elite athletes the minimum hours of employment are 7.5 hours per week, which can be averaged over six month periods.
Part-time is defined as a minimum of 20 hours per week.
For elite athletes the minimum hours of employment are 7.5 hours per week, which can be averaged over six month periods.
Part-time is defined as a minimum of 20 hours per week.
For elite athletes the minimum hours of employment are 7.5 hours per week, which can be averaged over six month periods.
Part-time is defined as a minimum of 20 hours per week.
For elite athletes the minimum hours of employment are 7.5 hours per week, which can be averaged over six month periods.
Part-time is defined as a minimum of 20 hours per week.
For elite athletes the minimum hours of employment are 7.5 hours per week, which can be averaged over six month periods.