Unit of competency Outline
Date retreived
22/07/2026 7:12 AM AWST
22/07/2026 7:12 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Develop and manufacture gear, conveyor screw and propeller patterns
Develop and manufacture gear, conveyor screw and propeller patterns
Unit of competency
National Code
MEM04017B
MEM04017B
State Code
W5281
W5281
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
09/01/2008
Field of Education
030713 - Metal Casting And Patternmaking
Original Release Date
09/01/2008
Nominal Hours
36
Description
This unit covers laying out and manufacturing gear, conveyor screw and propeller patterns.
Notes
Elements and Performance Criteria
1. Determine job requirements
- 1.1. Drawings, instructions and specifications are interpreted and understood.
- 1.2. Appropriate material is selected to specifications.
- 1.3. Moulding, cast techniques and foundry processes are applied in determining the type of pattern required.
2. Lay out pattern
- 2.1. Pattern parameters are calculated.
- 2.2. Pattern is laid out showing tapers, machining allowances, core prints and method of construction etc. to specification.
- 2.3. Jigs and fixtures are developed and manufactured to aid the manufacture of the pattern form as required.
3. Manufacture pattern
- 3.1. Materials are marked out and construction is developed to meet specifications.
- 3.2. Pattern or pattern component parts are produced to size and shape and checked for compliance with specifications using acceptable wood pattern making techniques, procedures and utilising appropriate hand and hand held power tools.
- 3.3. Pattern component parts are joined or fixed as required, according to specifications, using acceptable pattern making techniques and procedures.
- 3.4. Pattern is correctly marked, colour-coded and/or tagged in compliance with specifications or standard operating procedures.
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Material
Hardwood, softwood, epoxy resins, composites
Pattern parameters
Pitch circles, pressure angles, tooth form, left and right hand flight helix, pitch axial dimensions, angles, tapers, clearances, contraction allowances appropriate to developing various types of gear, conveyor and propeller forms
Calculated
The determination of contraction rates, pitch, proportions, profiles as well as general engineering calculations
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Material
Hardwood, softwood, epoxy resins, composites
Pattern parameters
Pitch circles, pressure angles, tooth form, left and right hand flight helix, pitch axial dimensions, angles, tapers, clearances, contraction allowances appropriate to developing various types of gear, conveyor and propeller forms
Calculated
The determination of contraction rates, pitch, proportions, profiles as well as general engineering calculations
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to develop and manufacture gear, conveyor screw and propeller patterns. Competency in this unit cannot be claimed until all prerequisites have been satisfied.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.
Context of and specific resources for assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.
This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with manufacturing gear, conveyor screw and propeller patterns or other units requiring the exercise of the skills and knowledge covered by this unit.
Method of assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.
Guidance information for assessment
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to develop and manufacture gear, conveyor screw and propeller patterns. Competency in this unit cannot be claimed until all prerequisites have been satisfied.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.
Context of and specific resources for assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.
This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with manufacturing gear, conveyor screw and propeller patterns or other units requiring the exercise of the skills and knowledge covered by this unit.
Method of assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.
Guidance information for assessment
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| M0243 | MEM4.17AA | Develop and manufacture gear, conveyor screw and propeller patterns | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OAX20 | MEM04017 | Develop and manufacture gear, conveyor screw and propeller patterns | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W245 | MEM40105 | Certificate IV in Engineering | Qualification |
| W247 | MEM50105 | Diploma of Engineering - Advanced Trade | Qualification |
| W238 | MEM30305 | Certificate III in Engineering - Fabrication Trade | Qualification |
| W726 | LMT31909 | Certificate III in Engineering - TCF Mechanic | Qualification |