Pathway Outline
Date retreived
22/07/2026 7:19 PM AWST
22/07/2026 7:19 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Marine
Marine
Pathway
National Code
—
—
State Code
AB53
AB53
DTWD Status
Approved
Approved
National Endorsed, State Implementation and Classification
Original TGA Release Date
16/03/2012
16/03/2012
Field of Education
0307 - Mechanical And Industrial Engineering And Technology
0307 - Mechanical And Industrial Engineering And Technology
Approved Date
12/09/2006
12/09/2006
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
5 Semesters
Current Release Version
4.00
4.00
Current Release Date
16/03/2012
16/03/2012
Nominal Hours
864
864
Description
This qualification covers the skills and knowledge required for employment as an Engineering Tradesperson - Fabrication within the metal, engineering, manufacturing and associated industries or other industries where Engineering Tradespersons - Fabrication work. The qualification has been specifically developed to meet the needs of apprentices in the above trade. The qualification packaging has been developed on an assumption that competency will be developed through an integrated combination of on and off-the-job learning strategies such as those delivered through a formal apprenticeship. The qualification may also be achieved through formal skills recognition assessment processes.
Packaging Rules
The minimum requirements for achievement of the Certificate III in Engineering - Fabrication Trade Marine are:
- completion of all twelve (12) core units of competency, and
- completion of Group A Fabrication stream units to the value of at least 40 points, and
- completion of units from Group B Certificate III Trade specialisation units listed in Appendix 1, Volume 1 of the Training Package, to bring the total value to at least 73 points
Points associated with prerequisites count towards the total (refer to units and prerequisites listing in Appendix 2, Volume 1).
Appropriate Group B elective units to the value of 16 points may be chosen from other endorsed Training Packages and accredited courses where those units are available for inclusion at Certificate III. Note that the elective units listed below include all of the units that are approved for selection from the MEM Training Package for use in this qualification. This meets the NQC requirement that one sixth of the total units must be able to be selected from other qualifications in the same Training Package.
Registered Training Organisations must seek a determination from Manufacturing Skills Australia in respect of the allocation of points values for units of competency drawn from other Training Packages or accredited courses.
Only select units that would be suitable for Fabrication Trade occupational outcomes.
- completion of all twelve (12) core units of competency, and
- completion of Group A Fabrication stream units to the value of at least 40 points, and
- completion of units from Group B Certificate III Trade specialisation units listed in Appendix 1, Volume 1 of the Training Package, to bring the total value to at least 73 points
Points associated with prerequisites count towards the total (refer to units and prerequisites listing in Appendix 2, Volume 1).
Appropriate Group B elective units to the value of 16 points may be chosen from other endorsed Training Packages and accredited courses where those units are available for inclusion at Certificate III. Note that the elective units listed below include all of the units that are approved for selection from the MEM Training Package for use in this qualification. This meets the NQC requirement that one sixth of the total units must be able to be selected from other qualifications in the same Training Package.
Registered Training Organisations must seek a determination from Manufacturing Skills Australia in respect of the allocation of points values for units of competency drawn from other Training Packages or accredited courses.
Only select units that would be suitable for Fabrication Trade occupational outcomes.
1. Core Units
All twelve (12) units must be completed.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W5502 | MEM13014A | Apply principles of occupational health and safety in the work environment | 4 | Unit of competency |
| W5531 | MEM15024A | Apply quality procedures | 4 | Unit of competency |
| W5532 | MEM15002A | Apply quality systems | 16 | Unit of competency |
| W5552 | MEM17003A | Assist in the provision of on the job training | 18 | Unit of competency |
| W5452 | MEM16008A | Interact with computing technology | 18 | Unit of competency |
| W5451 | MEM16006A | Organise and communicate information | 18 | Unit of competency |
| D3655 | MSAENV272B | Participate in environmentally sustainable work practices | 20 | Unit of competency |
| W5449 | MEM12024A | Perform computations | 27 | Unit of competency |
| W5492 | MEM12023A | Perform engineering measurements | 48 | Unit of competency |
| W5513 | MEM14005A | Plan a complete activity | 32 | Unit of competency |
| W5512 | MEM14004A | Plan to undertake a routine task | 4 | Unit of competency |
| W5548 | MEM16007A | Work with others in a manufacturing, engineering or related environment | 4 | Unit of competency |
2. Fabrication Trade Stream Units
Complete the following units (total of 74 points for this example program).
The following table outlines ONE example of a pathway training program for this qualification.
Please refer to the training package for the full details of available options.
The following table outlines ONE example of a pathway training program for this qualification.
Please refer to the training package for the full details of available options.
No information
Note
Class A, Apprenticeship only.
Entry Requirements
Not Applicable