Unit of competency Outline
Date retreived
23/07/2026 2:14 AM AWST
23/07/2026 2:14 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Perform brazing and or silver soldering
Perform brazing and or silver soldering
Unit of competency
National Code
MEM05006C
MEM05006C
State Code
S7596
S7596
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
29/08/2014
Field of Education
030711 - Boilermaking And Welding
Original Release Date
29/08/2014
Nominal Hours
18
Description
This unit covers performing brazing (including braze welding) and silver soldering. It includes the preparation of materials and equipment and the inspection of the completed work.
Notes
Elements and Performance Criteria
1. Prepare materials and equipment
- 1.1. Job requirements are determined from specifications and/ or instructions.
- 1.2. Materials are correctly prepared using appropriate tools and techniques.
- 1.3. Materials are correctly assembled/aligned to meet specifications as required.
- 1.4. Distortion prevention measures are identified and appropriate action is taken as required.
- 1.5. Heating equipment is assembled and set up safely and correctly in accordance with standard operating procedures.
- 1.6. Correct and appropriate consumables are selected and prepared.
- 1.7. Test run is undertaken and verified as required.
2. Braze and/or silver solder
- 2.1. The correct process is selected to meet specifications.
- 2.2. Materials are preheated as required.
- 2.3. Consumables are applied using correct techniques.
- 2.4. Jointing material is applied correctly and in appropriate quantities to meet job/specifications.
- 2.5. Material temperature is annealed using correct and appropriate techniques.
3. Inspect joints
- 3.1. Excess jointing materials are removed using correct and appropriate techniques.
- 3.2. Inspection of joints is undertaken to standard operating procedures.
- 3.3. Inspection results are reported/recorded using standard operating procedures as required.
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Materials
Ferrous and non-ferrous
Heating
Oxy acetylene and fuel gas, cylinders, connections, hoses, tips and nozzles
Consumables
Fluxes (resin or powder), all types of silver solder and brazing grades, etc.
Process
Brazing, braze welding and silver soldering
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Materials
Ferrous and non-ferrous
Heating
Oxy acetylene and fuel gas, cylinders, connections, hoses, tips and nozzles
Consumables
Fluxes (resin or powder), all types of silver solder and brazing grades, etc.
Process
Brazing, braze welding and silver soldering
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to perform brazing (including braze welding) and silver soldering.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.
Context of and specific resources for assessment
This unit may be assessed on the job, off the job or a combination of both. Where assessment occurs off the job, i.e. the candidate is not in productive work, then appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.
This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with brazing (including braze welding) and/or silver soldering or other units requiring the exercise of the skills and knowledge covered by this unit.
Method of assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.
Guidance information for assessment
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to perform brazing (including braze welding) and silver soldering.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.
Context of and specific resources for assessment
This unit may be assessed on the job, off the job or a combination of both. Where assessment occurs off the job, i.e. the candidate is not in productive work, then appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.
This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with brazing (including braze welding) and/or silver soldering or other units requiring the exercise of the skills and knowledge covered by this unit.
Method of assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.
Guidance information for assessment
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W5332 | MEM05006B | Perform brazing and/or silver soldering | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OAX07 | MEM05006 | Perform brazing and/or silver soldering | Unit of competency |