Unit of competency Outline
Date retreived
23/07/2026 12:56 AM AWST
23/07/2026 12:56 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Carry out heat treatment
Carry out heat treatment
Unit of competency
National Code
MEM06003C
MEM06003C
State Code
W5348
W5348
TGA Status
Replaced
Replaced
DTWD Status
Transition (Replaced)
Transition (Replaced)
State Implementation and Classification
Approved Date
18/06/2009
Field of Education
030799 - Mechanical And Industrial Engineering And Technology, N.e.c.
Original Release Date
18/06/2009
Nominal Hours
54
Description
This unit covers carrying out heat treatment of materials using a variety of equipment.
Notes
Elements and Performance Criteria
1. Determine requirements of job
- 1.1. Job requirements are determined from engineering drawings, job sheet, or verbal instructions from metallurgist or supervisor.
2. Select heat treatment equipment
- 2.1. Appropriate equipment is selected for the required heat treatment.
3. Set up equipment
- 3.1. Equipment is set up according to standard operating procedures and manufacturers' instructions.
4. Work safely with hot metals
- 4.1. Safety clothing and personal protective equipment is used correctly according to standard operating procedures.
- 4.2. Emergency procedures are demonstrated according to approved safety instructions.
- 4.3. Safety signs and symbols are identified and understood.
- 4.4. Equipment is used according to specifications and standard operating procedures.
5. Heat treat material
- 5.1. Material is treated to achieve required result and may include preparation processes.
- 5.2. Material is piece or batch loaded and unloaded using equipment appropriate to the situation, according to standard operating procedures.
- 5.3. Correct temperature is maintained according to standard operating procedures.
6. Identify hazardous conditions
- 6.1. Hazards are identified and hazard control measures are implemented to maintain a safe work environment.
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Equipment
Gas, electric, oil fired furnaces, vacuum furnace, induction heating, kilns, heated baths, salt baths, specialised tongs/tools and lifting equipment
Material
Plain carbon steels, alloy steels, non-ferrous
Preparation processes
Coatings and packings; preheating; soaking; quenching; tempering; annealing; normalising; carburizing; sintering
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Equipment
Gas, electric, oil fired furnaces, vacuum furnace, induction heating, kilns, heated baths, salt baths, specialised tongs/tools and lifting equipment
Material
Plain carbon steels, alloy steels, non-ferrous
Preparation processes
Coatings and packings; preheating; soaking; quenching; tempering; annealing; normalising; carburizing; sintering
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to work safely with hot metals to carry out heat treatment of materials.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.
Context of and specific resources for assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.
This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with performing heat treatment or other units requiring the exercise of the skills and knowledge covered by this unit.
Method of assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.
Guidance information for assessment
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to work safely with hot metals to carry out heat treatment of materials.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.
Context of and specific resources for assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.
This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with performing heat treatment or other units requiring the exercise of the skills and knowledge covered by this unit.
Method of assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.
Guidance information for assessment
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W0823 | MEM6.3AB | Carry out heat treatment | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OAW59 | MEM06003 | Carry out heat treatment | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BDX6 | MEA41318 | Certificate IV in Aeroskills (Structures) | Qualification |
| AVN6 | MEA41315 | Certificate IV in Aeroskills (Structures) | Qualification |
| W245 | MEM40105 | Certificate IV in Engineering | Qualification |
| W233 | MEM20105 | Certificate II in Engineering | Qualification |
| W247 | MEM50105 | Diploma of Engineering - Advanced Trade | Qualification |
| W238 | MEM30305 | Certificate III in Engineering - Fabrication Trade | Qualification |
| W236 | MEM30105 | Certificate III in Engineering - Production Systems | Qualification |
| W234 | MEM20205 | Certificate II in Engineering - Production Technology | Qualification |
| W726 | LMT31909 | Certificate III in Engineering - TCF Mechanic | Qualification |
| W528 | MSA60108 | Advanced Diploma of Manufacturing Technology | Qualification |
| W526 | MSA50108 | Diploma of Manufacturing Technology | Qualification |