Qualification Outline
22/07/2026 4:25 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate III in Engineering - Casting and Moulding Trade
Certificate III in Engineering - Casting and Moulding Trade
MEM31719
BEL2
Current
Approved
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 3.00 | 19/12/2022 | Current | Approved |
| 2.00 | 31/03/2021 | Replaced | Approved |
| 1.00 | 26/06/2019 | Replaced | Approved |
Description
This qualification defines the skills and knowledge required of an engineering tradesperson - casting and moulding within the metal, engineering, manufacturing and associated industries. The qualification has been specifically developed for apprentices in the above trade.
This qualification must be undertaken through a Training Contract or through formal trade recognition assessment processes.
The skills associated with this qualification are intended to apply to a wide range of casting and moulding work, including producing sand moulds by hand or using moulding machines, pouring and trimming castings and operating and monitoring melting furnaces.
This qualification is designed to provide an industry recognised skills profile related to trade work as a casting and moulding tradesperson.
Assessment of some units of competency must, where indicated, include evidence of the candidate’s performance in a functioning workplace where there is a sufficient range of appropriate tasks and materials to cover the scope of application of those units. All outcomes must reflect the standard of performance inherent in the job.
No licensing, legislative or certification requirements apply to this qualification at the time of publication. However, in some jurisdictions units in this qualification may require a license or relate to regulatory requirements. Licensing and regulatory information is included in the relevant units of competence.
Schedule
Packaging Rules
To be awarded the MEM31719 Certificate III in Engineering - Casting and Moulding Trade units of competency to the value of ninety-six (96) points must be achieved, chosen as outlined below:- core units of competency listed below (totalling thirty-three (33) points)
- elective units of competency to a minimum value of forty (40) points from Group A
- elective units of competency to a maximum value of twenty-three (23) points from Group B to bring the total value to ninety-six (96) points.
Appropriate Group B elective units to the value of eight (8) points may be chosen from this Training Package, other endorsed Training Packages and accredited courses where those units are available for inclusion at Certificate III. Only select units that would be suitable for occupational outcomes in a casting and moulding trade environment.
Registered Training Organisations (RTOs) must seek a determination from the industry parties in respect of the allocation of points values for units of competency drawn from other Training Packages or accredited courses. Determination of points requests are to be submitted to the industry parties through Innovation and Business Skills Australia (IBSA) Manufacturing. Refer to the MEM Companion Volume Implementation Guide for information on determination of unit points values.
Prerequisites
Points associated with prerequisites count towards the total. Units with prerequisite requirements are marked with an asterisk on training.gov.au (TGA) (refer to the individual units for details). All prerequisites are included in the qualification
Pathways
| State Code | Title |
|---|---|
| AD67 | Casting and Moulding |
1. Core Units
Complete all units listed below.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| OAU96 | MEM17003 | Assist in the provision of on-the-job training | 18 | Unit of competency |
| OAV03 | MEM16008 | Interact with computing technology | 18 | Unit of competency |
| OAV96 | MEM09002 | Interpret technical drawing | 36 | Unit of competency |
| OAV04 | MEM16006 | Organise and communicate information | 18 | Unit of competency |
| AWC13 | MSMENV272 | Participate in environmentally sustainable work practices | 20 | Unit of competency |
| OAV34 | MEM12024 | Perform computations | 27 | Unit of competency |
| OAV35 | MEM12023 | Perform engineering measurements | 48 | Unit of competency |
| OAV19 | MEM14006 | Plan work activities | 32 | Unit of competency |
| OAV60 | MEM11011 | Undertake manual handling | 18 | Unit of competency |
| OAU93 | MEM18001 | Use hand tools | 18 | Unit of competency |
| OAU92 | MEM18002 | Use power tools/hand held operations | 18 | Unit of competency |
| OAV23 | MEM13015 | Work safely and effectively in manufacturing and engineering | 32 | Unit of competency |
2. Group A Elective Unit
Complete elective units to a minimum value of forty (40) points from the list below.
Please refer to the packaging rules for the full details of available options.
3. Group B Elective Units
Complete elective units to a maximum value of twenty-three (23) points from the list below.
Please refer to the packaging rules for the full details of available options.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| OAV86 | MEM09011 | Apply basic engineering design concepts | 54 | Unit of competency |
| OAV63 | MEM11009 | Handle/move bulk fluids/gases | 36 | Unit of competency |
| OAV05 | MEM16005 | Operate as a team member to conduct manufacturing, engineering or related activities | 18 | Unit of competency |
| OAV50 | MEM11022 | Operate fixed/moveable load shifting equipment | 36 | Unit of competency |
| OAV62 | MEM11010 | Operate mobile load shifting equipment | 36 | Unit of competency |
| OAX32 | MEM04003 | Operate pressure die casting machine | 36 | Unit of competency |
| OAV55 | MEM11016 | Order materials | 18 | Unit of competency |
| OAV31 | MEM13001 | Perform emergency first aid | 9 | Unit of competency |
| OAX33 | MEM04002 | Perform gravity die casting | 18 | Unit of competency |
| OAV16 | MEM15004 | Perform inspection | 18 | Unit of competency |
| OEV86 | MEM13019 | Undertake work health and safety activities in the workplace | 27 | Unit of competency |
| OAV46 | MEM12001 | Use comparison and basic measuring devices | 18 | Unit of competency |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W238 | MEM30305 | Certificate III in Engineering - Fabrication Trade | Qualification |
No information
Entry Requirements
There are no entry requirements for this qualification.
Traineeships and Apprenticeships
Part-time is defined as a minimum of 20 hours per week.