Unit of competency Outline
Date retreived
22/07/2026 8:41 AM AWST
22/07/2026 8:41 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Use workshop machines for basic operations
Use workshop machines for basic operations
Unit of competency
National Code
MEM07032
MEM07032
State Code
OAW22
OAW22
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
24/01/2020
Field of Education
030707 - Metal Fitting, Turning And MacHining
Original Release Date
24/01/2020
Nominal Hours
18
Description
This unit of competency defines the skills and knowledge required to use workshop machines for basic operations in maintenance or jobbing environment. Where the interpretation of technical drawings is required unit MEM09002 Interpret technical drawing should also be selected.Where the selection and use of engineering measurement is required unit MEM12023 Perform engineering measurements should also be selected.Where the selection and use of power tools/hand held operations is required unit MEM18002 Use power tools/hand held operations should also be selected.No licensing, legislative or certification requirements apply to this unit at the time of publication. Band: AUnit Weight: 2
Notes
Elements and Performance Criteria
1 Determine job requirements
- 1.1 Follow standard operating procedures (SOPs)
- 1.2 Comply with work health and safety (WHS) requirements at all times
- 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
- 1.4 Identify job requirements from specifications, sketches, job sheets or work instructions
2 Set up machine
- 2.1 Select appropriate machine and tools to meet work requirements
- 2.2 Sharpen cutting tools, as required
- 2.3 Install tools according to procedures
- 2.4 Set guards and adjust, as required
3 Operate machine
- 3.1 Mount material to be machined and secure using clamping device/ appropriate to the material and work requirements
- 3.2 Operate machine to suit work and material requirements
- 3.3 Check machined component against work requirements and predetermined finish
- 3.4 Make adjustments, as required
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W5378 | MEM07032B | Use workshop machines for basic operations | Unit of competency |