Pathway Outline
Date retreived
22/07/2026 4:42 AM AWST
22/07/2026 4:42 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Applied Design
Applied Design
Pathway
National Code
—
—
State Code
CT95
CT95
DTWD Status
Replaced
Replaced
National Endorsed, State Implementation and Classification
Original TGA Release Date
12/10/2011
12/10/2011
Field of Education
1005 - Graphic And Design Studies
1005 - Graphic And Design Studies
Approved Date
12/01/2012
12/01/2012
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
1 Semester
Current Release Version
1.00
1.00
Current Release Date
12/10/2011
12/10/2011
Nominal Hours
515
515
Description
This qualification provides a pathway to a career in design covering areas such as Graphic Design, Fashion & Textile Design, Jewellery Design, Design for Industry, Three Dimensional Design.
Packaging Rules
1. Group 1
Drawing Workshop - complete the unit below:
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| S7599 | CUVACD301A | Produce drawings to communicate ideas | 40 | Unit of competency |
2. Group 2
Design Career Workshop - complete 3 units as follows:
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| D0887 | BSBOHS201A | Participate in OHS processes | 15 | Unit of competency |
| D2884 | CUSIND302A | Plan a career in the creative arts industry | 34 | Unit of competency |
| D0662 | BSBDES304A | Source and apply design industry knowledge | 20 | Unit of competency |
3. Group 3
Graphic Design Studio - complete 2 units listed below:
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| S7626 | CUVCAL401A | Experiment with techniques to produce calligraphy | 60 | Unit of competency |
| D0660 | BSBDES302A | Explore and apply the creative design process to 2D forms | 50 | Unit of competency |
| D0657 | BSBDES201A | Follow a design process | 40 | Unit of competency |
4. Group 4
Three Dimensional Design - complete 2 units listed below:
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| D0661 | BSBDES303A | Explore and apply the creative design process to 3D forms | 50 | Unit of competency |
| S7772 | CUVSCU301A | Produce sculpture | 50 | Unit of competency |
5. Group 5
Spatial Design Workshop - complete 2 units listed below:
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| D0659 | BSBDES301A | Explore the use of colour | 40 | Unit of competency |
| S7639 | CUVDES405A | Research and apply techniques in spatial design | 80 | Unit of competency |
6. Group 6
Digital Design Introduction - complete 1 unit listed below:
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| S7643 | CUVDIG301A | Produce digital images | 50 | Unit of competency |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| CT77 | Applied Design | Pathway |
Note
1. This training program has been created as a pathway of the Training Package qualification code CUV30311.
2. Further information about this training program may be obtained from the Director, Learning Portfolio Support at Central Institute of Technology on (08) 9427 1247.
3. Details had been entered into STARS on 30/10/2012.
2. Further information about this training program may be obtained from the Director, Learning Portfolio Support at Central Institute of Technology on (08) 9427 1247.
3. Details had been entered into STARS on 30/10/2012.
Entry Requirements
There are no entry requirements for this qualification.
