Pathway Outline
Date retreived
22/07/2026 10:15 AM AWST
22/07/2026 10:15 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Pre-Apprenticeship - Roof Plumbing
Pre-Apprenticeship - Roof Plumbing
Pathway
National Code
—
—
State Code
WA88
WA88
DTWD Status
Replaced
Replaced
National Endorsed, State Implementation and Classification
Original TGA Release Date
19/05/2011
19/05/2011
Field of Education
0403 - Building
0403 - Building
Approved Date
13/05/2010
13/05/2010
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
1 Semester
Current Release Version
1.00
1.00
Current Release Date
19/05/2011
19/05/2011
Nominal Hours
663
663
Description
This pathway will provide you with the practical skills and knowledge to effectively work in the roof plumbing and services sector, read plans and calculate plumbing quantities, carry out measurements and calculations and work safely on roofs. You will also learn skills in cutting and joining sheet metal, using plumbing hand and power tools, marking out materials and using simple levelling devices. As part of this course you will undertake a supervised work placement where you will be able to apply the skills and knowledge you have learned.
Packaging Rules
1. Compulsory units
The following fourteen (14) units must be completed:
2. Electives
Ten (10) units to be completed. Please select from the list below. Please refer to the CPC08 Training Package for details of pre requisites required for these units.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W9555 | CPCCST2005A | Carry out load slinging of off-site materials | 4 | Unit of competency |
| W9742 | CPCPRF2003A | Collect and store roof water | 24 | Unit of competency |
| W9634 | CPCPCM2009A | Cut using oxy-LPG-acetylene equipment | 8 | Unit of competency |
| W9377 | CPCCCM2008A | Erect and dismantle restricted height scaffolding | 16 | Unit of competency |
| W9743 | CPCPRF2004A | Fabricate roof coverings for curved structures | 16 | Unit of competency |
| W9455 | CPCCPB3015A | Install acoustic and thermal environmental protection systems | 20 | Unit of competency |
| W9747 | CPCPRF3004A | Install roof components | 40 | Unit of competency |
| W9744 | CPCPRF3001A | Receive roofing materials | 4 | Unit of competency |
| W9638 | CPCPCM2013A | Weld using arc welding equipment | 8 | Unit of competency |
| W9637 | CPCPCM2012A | Weld using oxy-acetylene equipment | 8 | Unit of competency |
3. Additional Units
Additional units - These units are only included as they are pre-requisite requirements for units within CPC20808. Pre-apprentices completing the requirements of additional units will receive Statements of Attainment for any additional competencies completed.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W9435 | CPCCOHS2001A | Apply OHS requirements, policies and procedures in the construction industry | 32 | Unit of competency |
| W9368 | CPCCCM1006A | Work safely at heights | 16 | Unit of competency |
4. Supervised Skills and Work Placement
The following five (5) units must be achieved.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| Y0303 | Y0303 | Supervised Skills Practice 1 | 40 | Module |
| Y0300 | Supervised Skills Practice 2 | 40 | Module | |
| Y0281 | Work Placement 1 | 40 | Module | |
| Y0282 | Work Placement 2 | 40 | Module | |
| Y0283 | Work Placement 3 | 40 | Module |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| 1616 | 52031 | Certificate I in Roof Plumbing (Pre-Apprenticeship) | Accredited course |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WB47 | Pre-Apprenticeship - Roof Plumbing | Pathway |
Note
This qualification is a pathway of the qualification CPC20808 which is taken from the Construction, Plumbing Services and Integrated Framework Training Package CPC08 and should be consulted for a full description of requirements.
1. Details of the pathway program were data entered onto STARS by the Curriculum Services Branch on 8/12/2010.
2. This training program has been submitted by Murray Warren, Registration, Accreditation & Curriculum Manager, Polytechnic West, phone: 9442 8356 for inclusion in STARS.
1. Details of the pathway program were data entered onto STARS by the Curriculum Services Branch on 8/12/2010.
2. This training program has been submitted by Murray Warren, Registration, Accreditation & Curriculum Manager, Polytechnic West, phone: 9442 8356 for inclusion in STARS.
No information